START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Jeti Duplex Radio Systems Jeti Duplex Radio Systems Support |
|
LinkBack | Thread Tools | Display Modes |
05-14-2014, 09:26 AM | #21 (permalink) | |
Registered Users
Join Date: Feb 2012
|
Add a "you have connected a flat battery" alarm
Quote:
I thought the others were working as they seemed to on the bench... But my two Heli's with JLog 2.5 don't work either. So... This feature is cool but JLog doesn't play well with it. Not Jeti's issue though, absolutely agree. My Kontronik ESC's aren't going anywhere either. Only thing that will likely happen is that they'll get replaced with Jive Pro's in the future (except the Kosmik, of course...). No biggie... Just posted to see if others have had the same experience.
__________________
Team - "Self Interests" - Flying what I want to, simply because I enjoy it! |
|
Sponsored Links | |||
Advertisement |
|
05-14-2014, 10:41 AM | #22 (permalink) |
Registered Users
Join Date: Mar 2011
|
My Kontronic with a Jlog 2.6 works. Before I did the 'Batt connect alarm' I was having dual alarms of Temperature and U voltage. When I stopped the Jlog activating and relied on the Jeti DS16 to trigger the alarm thresholds all was fine.
Edit..If the Jlog is alarming earlier then the perameters that the Jeti needs are maybe not met? |
05-14-2014, 11:29 AM | #23 (permalink) | |
Registered Users
Join Date: Apr 2011
Location: US
|
Quote:
I suspect there is a way to make this work, and when I have some time I'll experiment with it.
__________________
Mark Dusty Shelf queens: TDR2, TDR, Protos Max, Logo 550SX, Protos 500, Jeti DS-16, etc.... |
|
05-14-2014, 11:49 AM | #24 (permalink) |
Registered Users
Join Date: May 2009
|
The easiest way is to dump the Jlog and go Jeti all the way
__________________
TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets |
05-14-2014, 01:00 PM | #25 (permalink) | |
Registered Users
Join Date: Apr 2011
Location: US
|
Quote:
Jeti doesn't even have a Mezon that could be compared with a Kosmik. At one point I considered the comparison between them open, but I've gotten enough feedback from people who've tested them side by side to be pretty confident Kontronik ESC's have a real advantage over the Mezon and any other ESC currently on the market. These people wanted a lower cost alternative that worked as well so Jeti had the advantage going in, but it just didn't prove out.
__________________
Mark Dusty Shelf queens: TDR2, TDR, Protos Max, Logo 550SX, Protos 500, Jeti DS-16, etc.... |
|
05-14-2014, 01:33 PM | #26 (permalink) |
Registered Users
Join Date: Feb 2012
|
It was a joke...
__________________
Team - "Self Interests" - Flying what I want to, simply because I enjoy it! |
05-25-2014, 06:44 AM | #27 (permalink) |
Registered Users
Thread Starter
Join Date: Aug 2007
|
One thing I discovered today: If you set a model announcement using MX1+"sound on event", you need to set this AFTER the flat battery alarm. Otherwise, the flat battery alarm will not work.
|
07-03-2014, 01:01 PM | #28 (permalink) |
Registered Users
Join Date: May 2006
|
Jotto, finally upgraded my transmitter to 3.0. I've done something similar to you last year but use a sequence triggered by my throttle cut switch (locking safety switch). That way it plays the warning message as soon as I take the transmitter off of throttle cut and before I disengage throttle hold. My transmitter start-up requires that throttle cut be engaged when powered up. This moves the message to a later time when it's less likely to interfere with my model ID announcement, etc. Seems to work well but are there advantages to your approach that I'm missing? Thanks for your work!
__________________
Have laser, will travel. |
07-06-2014, 03:38 PM | #29 (permalink) | |
Registered Users
Thread Starter
Join Date: Aug 2007
|
Quote:
What happens if you go in and out of throttle hold mid-flight (e.g. when doing auto training). Does that trigger the alarm? |
|
08-21-2014, 10:58 PM | #30 (permalink) |
Registered Users
Join Date: Jul 2011
|
I'm going nuts,
I can't get this to work. Im using a DS-16, Mui 150, R7 and I can't get the sequencer to work the way I need. I tried it with a servo outputting the sequencer signal and that worked as expected, but the second telemetry alarm doesn't seem to be getting the information from the sequencer properly. I'm sure I've just got something set wrong, but I'll be d@mned if I know what it is. I can get it to give the flat batt alarm after the 3 sec sequence, but it seems like It stays active then, which means it will alarm during flight as the voltage drops. If I reverse things, it goes into alarm as soon as it's on. I've tried just using a switch to turn on the sequencer and it still works the same. Help
__________________
Where are we going, and why am I in this hand basket?
|
08-27-2014, 07:02 AM | #31 (permalink) | |
Registered Users
Thread Starter
Join Date: Aug 2007
|
Quote:
|
|
08-28-2014, 08:47 AM | #32 (permalink) |
Registered Users
Join Date: Jul 2011
|
I finally got it working, although I think all of my logical and telemetry switches are "backwards" from what all of you set up. Either way it now works just like I wanted. I might muddle with it some more just to prove to myself I actually understand the programming. Thanks for the help, though.
This transmitter is incredible but definitely requires a little thinking.
__________________
Where are we going, and why am I in this hand basket?
|
02-16-2015, 08:38 AM | #33 (permalink) | |
Registered Users
Join Date: May 2009
|
overtemp posted his little start up routine, I thought it would be interesting to add it here as an extra twists on the battery low idea
Quote:
__________________
TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets |
|
02-16-2015, 10:24 PM | #34 (permalink) |
Registered Users
Join Date: Jan 2007
|
Add a "you have connected a flat battery" alarm
Could you tell I was bored during an ice storm? It works great though
I actually just read the sequencer method. That's really bloody interesting. I might have to muddle through it just so I can understand the sequencer. So, it's basically on for 3 seconds, acting as a switch to enable the voltage check. What I don't get is what keeps it from re activating... EDIT: Ok, tried the sequencer system. After doing some messing to figure it, it works like a champ!
__________________
1 - Diabolo 1 stuffed with, well, see below 2 - Diabolo 2 stuffed with testosterone, jittery sweat, and rippling flanks Last edited by OverTemp; 02-17-2015 at 07:41 PM.. |
03-09-2015, 03:19 AM | #35 (permalink) |
Registered Users
Join Date: Mar 2011
|
Just wondering if anybody has this working with a Kosmik and jLog 2.6? Kosmik obviously missing the Ubec so need to find another 'trigger' Ta
|
03-09-2015, 08:25 AM | #36 (permalink) |
Registered Users
|
I setup an alarm on my radio to warn me if the ESC pwm% goes over 98%. My thinking was that it would be a good indicator of governor performance and if my packs were charged.
But I like the initial voltage check with the mAh consumed limiter and I may add that to my setup.
__________________
Jeti DS14us -- TT e700 -- 6s Logo600se UL -- Logo600-3d -- Logo500 UL -- Charge Case |
03-09-2015, 01:24 PM | #37 (permalink) | |
Registered Users
Join Date: Apr 2011
Location: US
|
Quote:
__________________
Mark Dusty Shelf queens: TDR2, TDR, Protos Max, Logo 550SX, Protos 500, Jeti DS-16, etc.... |
|
04-08-2016, 01:45 AM | #38 (permalink) |
Registered Users
Join Date: Jan 2011
|
I wonder if anyone can help. I have set my sequencer up exactly as the original screen shots however it only seems to act as the switch at the end of the sequence and not during. I have even tried running the sequence where it goes from +100 to -100 ever second for 4 seconds. On the MX, I look at the Q1 output and all I see is the cross until 4 seconds and then it goes to a tick and remains. Any ideas anyone? Many thanks.
__________________
Logo 700, Logo 600, Protos 380 Evo, Trex 470L, Jeti DS-16, TT Raptor 50 nitro, couple of planks and lots of laughs |
04-08-2016, 06:19 AM | #39 (permalink) |
Registered Users
Join Date: May 2009
|
Give us a few screenshots of your set up it might be easier to see where the problem is.
__________________
TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets |
Thread Tools | |
Display Modes | |
|
|