Helijive for a Logo 700

[raptor50luvver]

Just built a Logo 700 kit only and plan to fit my own components to it,i am planning to use either a 4525 520 motor or a Pyro 800 maybe but was hoping to use a Kontronik Helijive in it,now i am mainly sport and big air with a bit of 3D thrown in but i know i might be pushing my luck a bit with this ESC on this bird.

I have seen reports of the Helijive being used with these motors,on a Goblin 700 as an example but of course the Logo 700 is bigger and heavier.

So is anybody running one OK or should i look to getting a Kosmik?

Thanks in advance

[Stolla]

For your flying style its perfect, i would not hessitate with those motors to push it hard, but be smooth on collective and make sure your connectors are at least 5 mm and soldered with gastorch if you dont have a vey good iron and or soldering skills, most problems stems from connections. You dont want to know what ive done with my 120 hv and handwind motors, suffice to say i would not try it with any other incl my oem yge 160.
Kosmik only needed if you go14 s

[raptor50luvver]

Ah thats a promising start,appreciate the info there.

Many thanks.

[deepak]

Raptor luvver,
So,did you end up using the jive? If so has it worked for you?
Im thinking of doing the same thing. kindly let me know if it worked out well or if it shut down on you a few times
Thanks
d

[JCLs]

I have Jive on 700 Compass and it is just fine. I use buffer pack as recommended but it is self charging so is simple !!


Sent from my iPhone using fat fingers on tiny keyboard and Tapatalk

[raptor50luvver]

I use the Helijive on my 700DFC and Goblin 700 but i decided to go for a Kosmik 160 for my Logo 700,mainly beacuse a second hand one came up at a good price.

[deepak]

cool, just wanted to now
thanks
d

[cbagley25]

im interested on this topic to im getting more into 3d flying but more big air and sport flying and I have a 4530-500kv would this work out?

[Magneto]

Originally Posted by cbagley25

im interested on this topic to im getting more into 3d flying but more big air and sport flying and I have a 4530-500kv would this work out?

Sure no problem I have ran that motor on the Helijive with great results on a 700 disk I myself never had a cutout! A very aggressive high HS smack flyer may need a larger ESC!