Register Now

dcaccount · 01-16-2009, 02:43 PM

Hello,
I would like to replace the stock ESC with an Align 35A ESC with a 6V BEC output.

I would like to use it with Hitec servos (HS65 and HS5084) + stock gyro. I wonder if these can run at 6V with no problem at all.

Has anyone installed such a configuration?

Thanks a lot, Daniele

Tail boom · 01-16-2009, 02:59 PM

Hi Daniele,

The 5084 is rated for 5V only (see here: http://www.hitecrcd.com/product_file...135/5084MG.pdf).

The 65 is ok at 6V.

So you could get the Align 35X, along with a 5V step-down for your tail servo:
http://www.rcslot.com/pc-radio-contr...GNK10381A.html

Best,
Frank

01-16-2009, 02:43 PM	#1 (permalink)
dcaccount Registered Users Join Date: Aug 2008	Hitec servos, G110 gyro and 6V BEC Hello, I would like to replace the stock ESC with an Align 35A ESC with a 6V BEC output. I would like to use it with Hitec servos (HS65 and HS5084) + stock gyro. I wonder if these can run at 6V with no problem at all. Has anyone installed such a configuration? Thanks a lot, Daniele

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-16-2009, 02:59 PM	#2 (permalink)
Tail boom Registered Users My HF Map location Join Date: Jun 2008	Hi Daniele, The 5084 is rated for 5V only (see here: http://www.hitecrcd.com/product_file...135/5084MG.pdf). The 65 is ok at 6V. So you could get the Align 35X, along with a 5V step-down for your tail servo: http://www.rcslot.com/pc-radio-contr...GNK10381A.html Best, Frank

Register Now

Log-in