Register Now

IsaiahSaldivar · 01-27-2013, 12:17 AM

So i have 2 Nanos. Both are now shaking very bad when Im in idle up and when Im accelerating. Ive replaced several parts including swash plate, wings etc. Could these shakes come from a bent spindle? Ive about had it with Nano cpx. Has anyone been able to fix these shakes? Please don't say clean servos because im almost positive that is not the issue

kingmeow · 01-27-2013, 05:55 PM

I would check your spindles to see if they are bent. If they are, they will definitely get the shakes. You can bend them back by hand as it doesn't have to be 100% straight.

SYMAWD · 01-27-2013, 05:59 PM

Do you use silicone orings?

baumeister · 01-27-2013, 06:22 PM

Cleaning my servos took care of my shakes, heli went from mid air seizures to smooth.

ArchmageAU · 01-27-2013, 11:08 PM

Quote:

Originally Posted by IsaiahSaldivar

So i have 2 Nanos. Both are now shaking very bad when Im in idle up and when Im accelerating. Ive replaced several parts including swash plate, wings etc. Could these shakes come from a bent spindle? Ive about had it with Nano cpx. Has anyone been able to fix these shakes? Please don't say clean servos because im almost positive that is not the issue

Replace your feathering spindle. It is a common problem after many flights and crashes.

Blade Nano CP X Spindle Repair (7 min 22 sec)

I would not try to "unbend". They are too fine and fiddly.

carl20171 · 01-28-2013, 09:55 PM

Replace the spindle and try again. That is the most common fault. Also run the nut down snug and loosen 1 turn so you dont get TBE from being too tight. I bend a lot of spindles indoors. Have never bent on on outdoor flight. Replacing parts is part of the fun of micros. It is a lot better than getting a new heli each crash. Besides what else can you fly indoors?

paul.3 · 04-06-2013, 03:54 AM

Hi
It took me forever to sort out the shakes on 1 of my Nano cpx,s,yes it was a servo,I replaced and good as gold.
I had replaced the whole head with another and still the shakes until I took the time to have a look at what was really happening.
Not saying its your problem but if you tried everything else like me.
Just glad its sorted for me.
Good luck and happy flying.

01-27-2013, 12:17 AM	#1 (permalink)
IsaiahSaldivar Registered Users Join Date: Jan 2013	Nano Shakes. Help..... So i have 2 Nanos. Both are now shaking very bad when Im in idle up and when Im accelerating. Ive replaced several parts including swash plate, wings etc. Could these shakes come from a bent spindle? Ive about had it with Nano cpx. Has anyone been able to fix these shakes? Please don't say clean servos because im almost positive that is not the issue

01-27-2013, 05:59 PM	#3 (permalink)
SYMAWD Registered Users Join Date: Mar 2010	Do you use silicone orings? __________________ Blade 130X Blade mCP X (Bl) Blade Nano CP X Prôtos 700 Xtreme-Production

04-06-2013, 03:54 AM	#7 (permalink)
paul.3 Registered Users Join Date: Nov 2012	shakes Hi It took me forever to sort out the shakes on 1 of my Nano cpx,s,yes it was a servo,I replaced and good as gold. I had replaced the whole head with another and still the shakes until I took the time to have a look at what was really happening. Not saying its your problem but if you tried everything else like me. Just glad its sorted for me. Good luck and happy flying.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-27-2013, 05:55 PM	#2 (permalink)
kingmeow Registered Users Join Date: Jul 2011	I would check your spindles to see if they are bent. If they are, they will definitely get the shakes. You can bend them back by hand as it doesn't have to be 100% straight.

01-27-2013, 06:22 PM	#4 (permalink)
baumeister Registered Users Join Date: Jan 2012	Cleaning my servos took care of my shakes, heli went from mid air seizures to smooth.

01-28-2013, 09:55 PM	#6 (permalink)
carl20171 Registered Users Join Date: Dec 2012	Replace the spindle and try again. That is the most common fault. Also run the nut down snug and loosen 1 turn so you dont get TBE from being too tight. I bend a lot of spindles indoors. Have never bent on on outdoor flight. Replacing parts is part of the fun of micros. It is a lot better than getting a new heli each crash. Besides what else can you fly indoors?

Register Now

Log-in