START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
FMA/Revolectrix Product Support FMA/Revolectrix Factory Product Support |
|
LinkBack | Thread Tools | Display Modes |
11-05-2012, 10:08 PM | #1 (permalink) |
Registered Users
|
DX6i & Copilot 2 on-off switch
Hi
I configure my DX6i to be able to set the copilot 2 ON and OFF by using the gyro channel as describe in the instructions. My question is: now with that set-up I did program the selection switch for the gyro to be the FLAP/GYRO toggle switch. I had the choice between that one and the GEAR/FLIGHT MODE in the DX6i menu, but I use the GEAR/FLIGHT MODE switch for my IU mode. The thing is that I don't find the FLAP/GYRO switch at a easy location to be toggle ON or OFF without my finger leaving one of the two stick. A good location for an easy toggling would be the RUDDER DUAL RATE switch. Is there anyway I can use that switch to control the Copilot ON-OFF mode? Thanks
__________________
SYMA S-107/BLADE (2)450 3D FBL/ALIGN(3)T-REX 500 (2)T-REX 550 T-REX 700L V2/DX8 SCALE MD500(450) UH-60/AS350/BO105(500) A109(600) |
Sponsored Links | |||
Advertisement |
|
11-06-2012, 08:50 AM | #2 (permalink) |
Registered Users
Join Date: Jul 2009
|
this might help?
https://www.helifreak.com/showthread...dx6i+gear+gyro
__________________
"You can always tell a pilot,but not much" Gaui X 5 Phanthom 2 |
11-06-2012, 10:04 AM | #3 (permalink) | |
Registered Users
Thread Starter
|
Quote:
Maybe I miss explain myself.. I'm french so let say it that way. I have control on my co-pilot using the flap-gyro switch because I set it this way instead of using the gear-f.mode switch. I was just wondering if there is another way that the on-off copilot be activated with the Rudder-d/r switch instead.
__________________
SYMA S-107/BLADE (2)450 3D FBL/ALIGN(3)T-REX 500 (2)T-REX 550 T-REX 700L V2/DX8 SCALE MD500(450) UH-60/AS350/BO105(500) A109(600) |
|
Thread Tools | |
Display Modes | |
|
|