Register Now

dhirajsaxena · 10-08-2014, 01:01 PM

Hi,

I have a raptor titan se and raptor x50b. I want to convert them into fbl.

Does the stock main shaft fits rjx head? Also, does rjx fbl head requires a different feathering shaft??

Regards

dhirajsaxena · 10-10-2014, 08:30 AM

10 mm raptor maun shaft will fit.

Do we need a special rjx spindle or the titan se spindle will work??

KeithT · 10-22-2014, 08:15 AM

You will need the RJX spindle.

OldGasser · 11-05-2014, 10:43 AM

Hi dhirajsaxena,

RJX head fits and works great. Have one on my X50-Belt too.

If you want to use the lower hole on the mainshaft, you may have to shorten the rods that come with the head a few mm. Head-geometry seems to be better if mounted on the lower hole. But it also works fine if mounted on the upper hole.

Feathering-shaft needs to be the RJX -head-spindle 50 size (Up61106), it has 8 mm in diameter.

Kind regards
Georg

10-08-2014, 01:01 PM	#1 (permalink)
dhirajsaxena Registered Users Join Date: Sep 2014	RJX fbl head question Hi, I have a raptor titan se and raptor x50b. I want to convert them into fbl. Does the stock main shaft fits rjx head? Also, does rjx fbl head requires a different feathering shaft?? Regards

10-22-2014, 08:15 AM	#3 (permalink)
KeithT Registered Users Join Date: Nov 2008	You will need the RJX spindle. __________________ Raptor 50 TitanSE - AR7200BX + RJX head Raptor 550E with a flybar!! Align 500 pro with Speed fuselage mCPX V2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-10-2014, 08:30 AM	#2 (permalink)
dhirajsaxena Registered Users Thread Starter Join Date: Sep 2014	10 mm raptor maun shaft will fit. Do we need a special rjx spindle or the titan se spindle will work??

11-05-2014, 10:43 AM	#4 (permalink)
OldGasser Registered Users Join Date: Nov 2012	Hi dhirajsaxena, RJX head fits and works great. Have one on my X50-Belt too. If you want to use the lower hole on the mainshaft, you may have to shorten the rods that come with the head a few mm. Head-geometry seems to be better if mounted on the lower hole. But it also works fine if mounted on the upper hole. Feathering-shaft needs to be the RJX -head-spindle 50 size (Up61106), it has 8 mm in diameter. Kind regards Georg

Register Now

Log-in