Hyperion 720i Super Duo 3

[spektrex]

Regarding Hyperion 720i Super Duo 3 charger I found some strange behaviour in the PC software that goes with it.

I use the software to alter the memory banks but this is rather buggy to say the least. Has anyone been succesfull in copy / pasting memory banks from charger #1 to charger #2 ? (right mouse button 'copy' on memory bank 1 / charger 1, then right mouse button 'paste' on memory bank 1 / charger #2)?

I have set up 5 Lipo types in 5 memory banks including readable names for each memory bank, and now I try to copy these to charger #2, that gives buggy results, strange things happen. Try this and you'll see.

It is very common to have both parts of the duo charger set up the same you would think, but now I'd have to program each memory bank (1 - 5) on charger #1 and then do the same for charger #2.

Is there another copy/paste function that synchronizes both parts of the duo charger that I am not aware of?

[MrMel]

Save to File, and restore on the other charger/channel.

It's the easiest way, Copy was not meant to be on cross channel/charger, I have to check that function

But save to file and restore works, that's what I do on each test to reset to default for me.

/Fredrik

[spektrex]

I thought save to file / restore backed up and restored the entire charger, if that works per channel than that is the solution, I'll go try that, thanks!

[MrMel]

Restore is per channel, so no problem, go for that.
I will check copy/paste and see what issues might be there, in theory it should have been working over channel border too.

[spektrex]

a bit late but you were 100% right mrmel. Thanks!

Verstuurd met mijn Galaxy SII via Tapatalk