Post your Logo pictures here!

[CousinLarry]

My newly acquired and first Mikado - Logo 400 - I put on the FBL head and an AR7200BX. Currently waiting on some servo gears to get back in the air.. Had a brain fart and went inverted in normal mode

Anyways ...



This is my lunch break fleet

[maarset]

Looks great Larry!

[Eric O.]

The Logo 700 is my favorite to fly... It has all the nice flight characteristics of the other logos...

[scoio]

Originally Posted by Eric O.

The Logo 700 is my favorite to fly... It has all the nice flight characteristics of the other logos...

Man that's a nice collection! Logo addiction!

Chris

[TommyBear]

[brain]

- I was on the field and flying my Logo 600 Sx in this Christmas morning, merry Christmas and happy holiday to everyone!
[ame]http://www.youtube.com/watch?v=pzvW6Fhq8TA[/ame]

[ToddM]

Originally Posted by brain

Yes, Sx upgrade for my 600 3d

Brain - Where did you mount your 2S lipo for the servos? Can you post a few pics if you have? Are you using a regulator? If so, which one? Thanks

[brain]

Originally Posted by Beamr

Brain - Where did you mount your 2S lipo for the servos? Can you post a few pics if you have? Are you using a regulator? If so, which one? Thanks

underneath the frame, I have used 2s Life 1100 to direct to the vbar so no need the regulator, the Life battery is really thin and capable for the futaba Bls servos. I dont have any pic here, but will show you later.

[ReadyToCrash]

hi, i'm looking for a good 6s. what do you guys think of logo 500? how about logo 500 se? i have a logo 600 and i like it. would i like logo 500 as well? thanks.

[celm]

Originally Posted by ReadyToCrash

hi, i'm looking for a good 6s. what do you guys think of logo 500? how about logo 500 se? i have a logo 600 and i like it. would i like logo 500 as well? thanks.

I built a 6s 550 size heli out of a logo600 3d. I love how it flies and I like the beefier 600 head and tail and tail boom over the L500 set up

[ReadyToCrash]

Originally Posted by celm

I built a 6s 550 size heli out of a logo600 3d. I love how it flies and I like the beefier 600 head and tail and tail boom over the L500 set up

so logo 500se head isn't that strong as logo 600's? did you shorten the boom? to what size?
have you ever had an align 6s heli? can you compare your logo 6s to it? thanks

[celm]

Originally Posted by ReadyToCrash

so logo 500se head isn't that strong as logo 600's? did you shorten the boom? to what size?
have you ever had an align 6s heli? can you compare your logo 6s to it? thanks

this is what i did:

started with L600 3D
cut the tail boom,tail push rod and boom supports to 500se size.
used a 500se belt
used a 25mm motor plate
mod .7 main gear
HKIII-4025-1100km motor
edge FBL 553 mains
kontronic 100LV ESC
Full size V-Bar
L500 canopy
L500 landing skids
for servos i used DS610 and ds650

I had a Trex 550 and this set up is close to that and my Logo 600/550 out flies my Trex 550. Before i got my first logo i had Trex250 all the way to 700, when i got my Logo400 i replaces all my trex`s with logos

If you want a 500 size heli then it will be a Logo 400

[ReadyToCrash]

Originally Posted by celm

this is what i did:

started with L600 3D
cut the tail boom,tail push rod and boom supports to 500se size.
used a 500se belt
used a 25mm motor plate
mod .7 main gear
HKIII-4025-1100km motor
edge FBL 553 mains
kontronic 100LV ESC
Full size V-Bar
L500 canopy
L500 landing skids
for servos i used DS610 and ds650

I had a Trex 550 and this set up is close to that and my Logo 600/550 out flies my Trex 550. Before i got my first logo i had Trex250 all the way to 700, when i got my Logo400 i replaces all my trex`s with logos

If you want a 500 size heli then it will be a Logo 400

excellent! that's what i'm thinking to do, but why did you use a 25mm motor plate and why did you do the .7 main gear mod? thanks

[celm]

I went with the 25mm motor plate cause the bolt spacing on the 4025 motor is 25mm, the mod .7 cause I needed a 15X tooth count on my main gear to reach the head speed.I wanted

[ReadyToCrash]

Originally Posted by celm

my Logo 600/550 out flies my Trex 550.

could you please elaborate? do you mean it is more controllable, more stable, easier and more satisfying to fly? more powerful?
thanks

[celm]

Originally Posted by ReadyToCrash

could you please elaborate? do you mean it is more controllable, more stable, easier and more satisfying to fly? more powerful?
thanks

To me the logo felt more smoother, crisper,better responsiveness.

[RAM]

Gravydrive my man,

I'm just at that point where I need to make a decision on wiring options and your setup looks pretty sweet (through the servo deck above boom)! If you have any of those grommets left please let me know - would be happy to give you my FedEx #. What wires are you running through there btw? I'm sure its the tail servo and sensor wires, if so where/how do you bunch up the remaining wires? Please keep in mind I'm a newb.

Thx,

Rob

Originally Posted by gravydrive

Thanks guys! It's a grommet, but not a canopy one. I had to order a pack of 100 and only used 4. They're installed in a 3/8" hole, shoot me a PM if you want me to send a couple your way!

[Luisito]

Here's a couple of shots of my Logo 600SE Carbon Fiber Frame and the new edition to the family, the Logo 700 XXTreme.







Have a Happy New Year all you Heli Freaks

Luis

[Stuarty]

Hi luis

Very nice, any chance of some close ups of your electronics, scorpion guard in particular?

Thanks
Stu

[Luisito]

Originally Posted by Stuarty

Hi luis

Very nice, any chance of some close ups of your electronics, scorpion guard in particular?

Thanks
Stu

Here you go.



I wouldn't fly a Heli without some insurance...