3gx v3.1 dir setup problems please help!

[6.6leater]

Hello, new to this forum and trying to find a answer to my issues I am having. trying to convert my trex 600 to fbl and whenever I go to dir menu I get constant cyclic inputs. Moving pitch slowly there are big jumps on the servos and no smooth movement at all. Everything is powered by 2s lipo on the electronics side and bound to new heli in dx7s. Can someone please let me know what I am doing wrong.

Derek

[Imzzaudae]

Watch this series!

3GX Setup Guide Part 1 Mounting & Wiring (10 min 38 sec)

3GX Setup Guide Part 2 DIR & Governor Setup (8 min 15 sec)

3GX Setup Guide Part 3 Rudder, Delay & Anti Torque Compensation (6 min 33 sec)

3GX Setup Guide Part 4 Flight Mode Settings On The Gyro (No Computer!) (7 min 17 sec)

3GX Setup Guide Part 5 Flight Mode Settings On The Computer (6 min 6 sec)

Try doing the Guvnor setup!
I also have a problem with my Elevator servo hopping around from time to time.

I'm working on a Trex 550E
Even if this does not answer your question you will enjoy the series.

Pay particular attention to the last video in the series!
Very good advice!

Ron

[heligaz]

Thanks for the videos, I will give this a try .
I need to get it set up to my Jeti radio which is not as easy as my Futaba