Register Now

Rotax Raptor · 10-19-2011, 02:28 PM

Hello I had to replace the fan casing in my 60. problem is the servo tray does not fit now .the replacement appears to have a spacerfor the head . Do you cut the new piece to clear! What to do.

TCipolla · 10-19-2011, 06:44 PM

Which part of the servo frame doesn't fit? The bottom attachment point on the servo frame is supposed to bolt to the cooling shroud.

Rotax Raptor · 10-21-2011, 08:46 AM

I got it fixed the top screw pivot in the frame. The 2 lower screw into the shroud you must use pvo 412 and pvo413 they are a v2 version that's why the numbers are different.from the manual.

TCipolla · 10-21-2011, 12:57 PM

Glad you caught that and got it fixed!

10-19-2011, 02:28 PM	#1 (permalink)
Rotax Raptor Registered Users Join Date: Apr 2011	Fan casing help Hello I had to replace the fan casing in my 60. problem is the servo tray does not fit now .the replacement appears to have a spacerfor the head . Do you cut the new piece to clear! What to do.

10-19-2011, 06:44 PM	#2 (permalink)
TCipolla Registered Users My HF Map location Join Date: Aug 2009 Location: Shiloh, IL	Which part of the servo frame doesn't fit? The bottom attachment point on the servo frame is supposed to bolt to the cooling shroud. __________________ Tim T-Rex 470LP...

10-21-2011, 12:57 PM	#4 (permalink)
TCipolla Registered Users My HF Map location Join Date: Aug 2009 Location: Shiloh, IL	Glad you caught that and got it fixed! __________________ Tim T-Rex 470LP...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-21-2011, 08:46 AM	#3 (permalink)
Rotax Raptor Registered Users Thread Starter Join Date: Apr 2011	I got it fixed the top screw pivot in the frame. The 2 lower screw into the shroud you must use pvo 412 and pvo413 they are a v2 version that's why the numbers are different.from the manual.

Register Now

Log-in