START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Hitec Gyro/Servos Hitec Gyro and Servo Support |
|
LinkBack | Thread Tools | Display Modes |
01-18-2013, 10:18 AM | #1 (permalink) |
Registered Users
Join Date: Nov 2011
|
HS65mg vs HS5065mg identification
Is there anyway to tell which is which? I got a used heli with servos that look like Hitec HS-65MG or HS-5065MG except all three labels are missing from the case. What would be a good way to identify which servos I have? I just don't want to take a risk of hooking them up to 3GX w/o knowing it is for sure HS-5065MG...
Any difference in the internal/board that I should be looking for? Externally, they look identical(I have another sets of 65mg and 5065mg I'm comparing). Ones with no labels have a small circular label on the side of the housing w/ green leaf icon. |
Sponsored Links | |||
Advertisement |
|
01-19-2013, 03:38 AM | #2 (permalink) | |
Registered Users
Join Date: Jul 2008
|
Quote:
2. Neither servo handy tonight but from the files.. . Digital Servo - Digital (aka FET) Servo & difference with Analogue Servo (PDF). (This is a Futaba publication, extract attached hereto - all servo differ somewhat but principles remain same) Also attached are photos of boards from two burnt out HS-65MG servo which should be good for a comparison with the boards on each of your servo. (Attach a horn so as to hold top, pins & gears in place, remove screws and lift base plate to expose board.) . Servo - Burnout. Cause & Prevention Alan T. Alan's Hobby, Model & RC FAQ Web Links |
|
Thread Tools | |
Display Modes | |
|
|