Register Now

Qooo · 01-04-2009, 05:48 PM

I have received 2 pcs of my 64T version 2. This one looks much better version 1 and it will insert into the frame easily because it has no bottom rim.

Blik · 01-04-2009, 06:44 PM

Hey Qooo, I have been following your thread on RR and this new Lepton pulley looks awesome. Could you let everyone know here on HF how it performs and what the price is if you can get a bunch of us Lepton flyers on the order list?

Cheers
Blik

Qooo · 01-04-2009, 07:50 PM

All my batteries are dead in the movie. I am planning to invest a new set of batteries now.

Normally, with 6s1p 2000mah, I can fly 4mins just doing tictocs ... now ... all my batteries can only run for 3mins, otherwise it will be over discharged.

My setup in movie:
Hacker A30-12XL,
19T Pinion gear,
64T front pulley, 14T tail pulley, 1:4.57 tail ratio.
70MM CF from Readyheli
GY611 + 251BLS
Standard short boom
JR3405 CCPM servos
DX7 + AR6100 RX
Jeti Spin 66 ESC, built-in BEC 5.5V
6S1P 2000mah

Spin66 setup
Constant 3D Gov : HS 2650rpm = TS 12114rpm
Max RPM record : HS 2920rpm = TS 13348rpm

corona007 · 01-12-2009, 10:58 PM

Anyone try a S9254 on their tail?

Qooo · 01-14-2009, 09:04 PM

The 1st tail servo I used was S9254 + 401 which worked great with 56T a year ago.
If you use S9254 + 401 with 64T front pulley, I think you surely will get much better tail authority.

uffe40 · 01-15-2009, 06:40 AM

Hi
i use 9254 to mikado v-bar works great
Uffe

uffe40 · 02-16-2009, 12:57 PM

Hi Simon i have received the new frontpulley nice work i will test it tomorrow
Many Thanks
Uffe

toyturbo · 04-01-2009, 02:29 PM

Any flight report updates on the 64t front pulley? How does it fly? Does it give the Lepton the tail authority it was lacking?

nwmartin · 08-03-2009, 08:05 AM

Where can you buy it

owde · 08-04-2009, 07:36 AM

I got one off Qooo a few weeks ago, he had some made up, maybe PM him or try RunRyder. And if your reading Qooo sorry I havn't got back too you about how it's been going, anyhow it's been flying really well. I've been able too drop the headspeed down to around 2800 and the tail holds as good as, even better than when head speed was at 3000 without new pully. There's a bit more of a whine sound and the booms a couple of mm shorter but it's a very good part and would recommend it to anyone. With this and my new Hyperion G3 VX packs the Lepton's flying best ever, thanks Qooo.

01-04-2009, 05:48 PM	#1 (permalink)
Qooo Registered Users Join Date: Apr 2008	64T front pulley for Lepton (Version 2) I have received 2 pcs of my 64T version 2. This one looks much better version 1 and it will insert into the frame easily because it has no bottom rim. Attached Thumbnails

01-12-2009, 10:58 PM	#4 (permalink)
corona007 Registered Users Join Date: May 2007	Tail servo Anyone try a S9254 on their tail? __________________ Wooohoo.... Last edited by corona007; 01-12-2009 at 11:02 PM.. Reason: wrong thread

08-03-2009, 08:05 AM	#9 (permalink)
nwmartin Registered Users Join Date: Nov 2008	64T front pulley for Lepton (Version 2) Where can you buy it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-04-2009, 06:44 PM	#2 (permalink)
Blik Registered Users Join Date: May 2005	Hey Qooo, I have been following your thread on RR and this new Lepton pulley looks awesome. Could you let everyone know here on HF how it performs and what the price is if you can get a bunch of us Lepton flyers on the order list? Cheers Blik

01-04-2009, 07:50 PM	#3 (permalink)
Qooo Registered Users Thread Starter Join Date: Apr 2008	All my batteries are dead in the movie. I am planning to invest a new set of batteries now. Normally, with 6s1p 2000mah, I can fly 4mins just doing tictocs ... now ... all my batteries can only run for 3mins, otherwise it will be over discharged. My setup in movie: Hacker A30-12XL, 19T Pinion gear, 64T front pulley, 14T tail pulley, 1:4.57 tail ratio. 70MM CF from Readyheli GY611 + 251BLS Standard short boom JR3405 CCPM servos DX7 + AR6100 RX Jeti Spin 66 ESC, built-in BEC 5.5V 6S1P 2000mah Spin66 setup Constant 3D Gov : HS 2650rpm = TS 12114rpm Max RPM record : HS 2920rpm = TS 13348rpm

01-14-2009, 09:04 PM	#5 (permalink)
Qooo Registered Users Thread Starter Join Date: Apr 2008	The 1st tail servo I used was S9254 + 401 which worked great with 56T a year ago. If you use S9254 + 401 with 64T front pulley, I think you surely will get much better tail authority.

01-15-2009, 06:40 AM	#6 (permalink)
uffe40 Registered Users Join Date: Apr 2007	Hi i use 9254 to mikado v-bar works great Uffe

02-16-2009, 12:57 PM	#7 (permalink)
uffe40 Registered Users Join Date: Apr 2007	Hi Simon i have received the new frontpulley nice work i will test it tomorrow Many Thanks Uffe

04-01-2009, 02:29 PM	#8 (permalink)
toyturbo Registered Users Join Date: Feb 2006	Any flight report updates on the 64t front pulley? How does it fly? Does it give the Lepton the tail authority it was lacking?

08-04-2009, 07:36 AM	#10 (permalink)
owde Registered Users Join Date: Jan 2008	I got one off Qooo a few weeks ago, he had some made up, maybe PM him or try RunRyder. And if your reading Qooo sorry I havn't got back too you about how it's been going, anyhow it's been flying really well. I've been able too drop the headspeed down to around 2800 and the tail holds as good as, even better than when head speed was at 3000 without new pully. There's a bit more of a whine sound and the booms a couple of mm shorter but it's a very good part and would recommend it to anyone. With this and my new Hyperion G3 VX packs the Lepton's flying best ever, thanks Qooo.

Register Now

Log-in