GY401 TRAVEL LIMIT QUESTION ???

[1972neo]

HI everyone ! at hover, most rc heli tail-pitch slider close to tail case(anti-rotation)so this side more shorter than another side(travel between each side) o.k , now if the travel limit follow the lenght side ,another shorter side when full rudder stick input (rudder stick to right) the tail-pitch slider may binding the tail case !
CAN SOMEONE HELP ! THANK'S

[drrm123]

Not 100% sure what your asking but if what i'm thinking. The gyro needs to be put in rate(normal) mode to adjust correctly. Hold rudder stick full right and see if servo binds and also full left, adjust limit to max amount without binding. Expo's on radio should be set at 100%. If pitch slider is closer to tail case that is normal. It needs more pitch to counter torque from rotor blades, thats why it's closer in that direction. Some people just use in HH mode and set pitch slider at center(equal in both directions) and never fly in rate mode. I personally think it is better if set up properly in rate mode in case gyro lets go or fails, heli would not spin wildly out of control. If rudder is binding to right adjust ATV's on radio.