START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Hitec Gyro/Servos Hitec Gyro and Servo Support |
|
LinkBack | Thread Tools | Display Modes |
01-17-2009, 05:54 PM | #1 (permalink) |
Registered Users
Join Date: Jan 2009
|
Hitec HG-5000 (Logictech 2100T) and DX6i - TL at low gain?
Hey guys,
For some reason, the Tail Lock light on the gyro only comes on when I set the TX at low gain, below 45% or so. Is that normal? I know GY401 acts the other way around, is that true? Are you using the GYRO option on the DX6i, or just leave it off (INH)? How about travel endpoint adjustment? I set it up for 125% ETA, 30% GYRO, this way I get the TL on. I'm a complete noob, this is my first heli ever and I only flew it twice. Wasn't too happy with the tail however - I didn't expect it to be fully locked but it moved just too much for me. I bought the heli used (Trex450) and the previous owner was oblivious to things such as servo movement limitation (it was badly binding at the ends), so I figured the setup is a mess anyway. Thanks. |
Sponsored Links | |||
Advertisement |
|
Thread Tools | |
Display Modes | |
|
|