Bought NEW Trex 700 DFC HV Heli. ???? now about tail shaft

[flybydanny]

Will do thank you sir

[flybydanny]

Which tail boom has best results CF or aluminum?

[Dino Spadaccini]

aluminum

[flybydanny]

Thanks Dino will be switching boom and tail blades

[flybydanny]

Could having my tail blades pretty tight be a cause a like humming buzzing sound?

[Dino Spadaccini]

yes do not run them tight that will cause a hum lightly snug thats all

[ualdrivr]

Just go out and fly the darrn Heli. The DFC flies just fine. I fly the white gears with the 4mm Nitro tail shaft on it and it flies great. .

[flybydanny]

I have been flying her, I'm just used to solid helis that tha tail don't buzz
It flies rather well

[jstan]

+1M on Ualdriver's comment...just fly the thing and don't worry about what may happen to a small % of 700s! Have fun and try and get better every day you get to fly. BooBoos are part of rc...if it happens, then update/upgrade as makes sense.

[338federal]

Hello! I have the 6mm tailshaft and the tail hangs on the dogbones going over. Tail spins like hell because the tail is not working. Have someone the same issue?

[rcflyerheli]

You might not like the answer, but if you are using the stock dog bone links, you might give the KDE upgrade a try. I can't say this about all their stuff, but the aluminum links and the ball bearings on the grips have worked well for me.

[338federal]

Do you mean the hole tail? I have kde dogbones but original v2 tailslider. It hangs. I have looked at the new align slider and kde. Maybe i get a try with kde slider.

[338federal]

This is how it goes with original and kde dogbones. Not with original tailshaft only with the black 6mm shaft.