START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
MSH Protos MSH Protos Helicopter Support Forum |
|
LinkBack | Thread Tools | Display Modes |
11-26-2008, 08:51 PM | #1 (permalink) |
Team Taco VP
|
MSH Protos Build videos!
OK I have finally started the build!
Special thanks to MSH for making this happen! Here is where to go to see the videos: https://www.helifreak.com/showthread.php?t=105493 Bob
__________________
"Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco! |
Sponsored Links | |||
Advertisement |
|
12-02-2008, 01:47 AM | #2 (permalink) |
Registered Users
Join Date: May 2008
|
Excellent timing I am about to hit the buy button on mine. Thanks Finless.
|
04-17-2012, 12:24 AM | #3 (permalink) |
Registered Users
Join Date: Feb 2011
|
Build
Excellent videos, helped me alot with my recent protos build.
I would like to point out one thing however, for the ones that will be building this heli with the help of Bob's videos: The tail boom should be mounted so that the hole is to to back(to the tail case) and not as shown in the video. If you look at the heli from the back, the MSH heli logo should be on the right. This is now very evident since the tail boom has on both ends color grinded off for electrical contact(static), and if you mount it the other way around(as per Bob's video), the grinded part is always visible. If you mount it correctly it isn't visible anymore. other than this, very good videos
__________________
MSH Prôtos 500: FBL, savox, beastX Blade 400 3D,Hitec HS65mg, Spartan Quark, Hitec 5084MG, Align 35A X esc Blade Mcpx-brushless, SR-120 tail Blade nano cpx, brushless nanoheli kit |
04-17-2012, 07:22 AM | #4 (permalink) | |
Registered Users
|
Quote:
This would be opposite of what is shown in the manual, and then if it fits how would you adjust belt tension? So I retract my prior comment the OP is in fact correct.
__________________
Diabolo 550 Vbar NEO : Diabolo 600 Vbar NEO : Diabolo 700 Vbar NEO: OXY 5 Vbar NEO : Logo 600SX V2 Vbar NEO : SAB G380 Vbar NEO : OXY3 TE : Vbar Control : Citizen 735 Last edited by shadco; 04-18-2012 at 09:21 AM.. |
|
04-17-2012, 03:44 PM | #5 (permalink) |
Registered Users
Join Date: Feb 2008
|
When the video was made, tail booms came with holes front and back: no slots or paint removed in both ends.
The belt is adjusted not by sliding the tail in the boom block, but sliding the boom block in the frame. Tail boom must be inserted all the way into the boom block, otherwise the tail may move forward with the belt tension and cause the belt skip in the main gear.
__________________
MSH Prôtos CF FBL Stretch E-flite HABU 32, Parkzone HABU 2 Ikarus F3A Multiplex Parkmaster 3D |
Thread Tools | |
Display Modes | |
|
|