Register Now

ckanroh · 06-11-2012, 10:02 AM

Hello guys,
Recently I just got an 6ch Dynam eRazor 450. I've get out with and... first flight (with training gear)- first crush; consequences: main blades broken.
Now I try to check the damages on the heli. I'll need some help with checkings. What I sholud check first and where do i have to look and verify.
Also if you could advise me with the transmitter set up's... the instruction manual is not quite explicative.
Please, the experts I need your advices and opinions.

Thank you.

comatosed · 06-11-2012, 11:02 AM

Basically, you need to check, EVERYTHING!

But the main things to check would be feathering shaft, main shaft, tail shaft, main gear, all links in the head, servos and have a good look over the frame for any cracks etc.

06-11-2012, 10:02 AM	#1 (permalink)
ckanroh Registered Users Join Date: Mar 2012	eRazor450 - need help pls Hello guys, Recently I just got an 6ch Dynam eRazor 450. I've get out with and... first flight (with training gear)- first crush; consequences: main blades broken. Now I try to check the damages on the heli. I'll need some help with checkings. What I sholud check first and where do i have to look and verify. Also if you could advise me with the transmitter set up's... the instruction manual is not quite explicative. Please, the experts I need your advices and opinions. Thank you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-11-2012, 11:02 AM	#2 (permalink)
comatosed Registered Users Join Date: Jan 2012	Basically, you need to check, EVERYTHING! But the main things to check would be feathering shaft, main shaft, tail shaft, main gear, all links in the head, servos and have a good look over the frame for any cracks etc.

Register Now

Log-in