START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Master CP Walkera Master CP Helicopter Support |
|
LinkBack | Thread Tools | Display Modes |
02-15-2015, 12:51 PM | #1 (permalink) |
Registered Users
Join Date: Jul 2012
|
Master CP binding process
Hello All,
I had a Master CP given to me and I'm wondering if the rx requires it's own bind plug ?And I don't see a port on the rx labeled "Bind". I'm assuming it needs one to bind to the tx. Any help is greatly appreciated Thanks Big |
Sponsored Links | |||
Advertisement |
|
02-18-2015, 07:31 PM | #2 (permalink) |
Registered Users
Join Date: Feb 2014
|
Hi Big
A standard bind plug will do as they are all the same you can use any spare port on the RX From memory ( been a while) plug bind plug in power heli on and turn your TX on you should see your TX start to flash and then go solid Unplug heli turn off tx ,remove bind plug, and repower tx and plug heli on should now automaticly Hope this helps Cheers Watho
__________________
Master CP devo 7E Walkera 450 DO3 Blade 4503D conv to FBL Spectrum DX6i Building 550x and a phoenix sim fly,crash,order parts,repair and repeat |
02-18-2015, 10:50 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jul 2012
|
Thanks Watho,
I'll give that a try as the manuals are not much help in this area. Big |
02-19-2015, 01:13 AM | #4 (permalink) | |
Registered Users
Join Date: Feb 2014
|
Quote:
Hope this helps it has been a while since played with the CP Now the feelings with the manuals not much help down here in auz either Just keep tring different sequences tx first then rx or vis a versa not sure from memory don't give up lots of fun to be had once you get it lol Cheers watho
__________________
Master CP devo 7E Walkera 450 DO3 Blade 4503D conv to FBL Spectrum DX6i Building 550x and a phoenix sim fly,crash,order parts,repair and repeat |
|
Thread Tools | |
Display Modes | |
|
|