Register Now

crashcopterman · 03-26-2016, 12:23 PM

Atta boy, he gets a

!!

Steve

Ah Clem · 04-11-2016, 12:57 AM

My most recent machine to be upgraded to KBDD Main Blades!

Rush 750!

I will be upgrading it to DMSS sometime this week or next!

Atomic Skull · 05-01-2016, 11:54 PM

Rush 750 V1 with V2 canopy.

V2 canopy will not fit with a YGE 120a on the upper electronics tray, it has to be installed in the front due to it's odd shape. If the ESC is about 20mm tall and 50mm wide or less it should fit though. I ended up moving the ESC to the forward tray for this reason.

RC Booya canopy mounts can be used with the V2 canopy if you are careful reaming the upper holes. I used a knife edge reamer and pressed down as I reamed the hole to ensure it expanded downwards toward the flat spot on the canopy. The original hole for the grommet is very near a sharp curve in the surface and you do not want the hole expanding into that curved area. I recommend using the reamer to expand the hole to 8mm then using some rolled up sandpaper to smooth the edges of the hole and expand it to about 8.5mm

crashcopterman · 05-14-2016, 09:27 PM

Zoom zoom!

Sent from my iPhone using Tapatalk

03-26-2016, 12:23 PM	#1081 (permalink)
crashcopterman Registered Users Join Date: Feb 2012 Location: Grande Prairie, Alberta Canada	Atta boy, he gets a !! Steve __________________ Nano CPX \|\| 130X \|\| 230S II 450 3D converted to 450X \|\| 360CFX \|\| 480 Fusion II 550X \|\| Oxy 5 MEG \|\| ALeeS Rush 700 Evolution \|\| Goblin 770 Sport 'My flight style, determines my crash style"

04-11-2016, 12:57 AM	#1082 (permalink)
Ah Clem Registered Users Join Date: Jan 2006	My most recent machine to be upgraded to KBDD Main Blades! Rush 750! I will be upgrading it to DMSS sometime this week or next! __________________ KBDD-Team Captain, JR DFA Team Pilot. Forza 450, Forza 600N, Forza 700, Compass 6HV-U, Warp, 7HV,Knight Pro,Knight 3D, Atom, Odin II, 6HV, 3D Plus, Knight 50, Chronos, Velos, Steam 550 and 600, OMP M2 (and anything else I can get my hands on...).

05-01-2016, 11:54 PM	#1083 (permalink)
Atomic Skull Registered Users Join Date: Dec 2011	Rush 750 V1 with V2 canopy. V2 canopy will not fit with a YGE 120a on the upper electronics tray, it has to be installed in the front due to it's odd shape. If the ESC is about 20mm tall and 50mm wide or less it should fit though. I ended up moving the ESC to the forward tray for this reason. RC Booya canopy mounts can be used with the V2 canopy if you are careful reaming the upper holes. I used a knife edge reamer and pressed down as I reamed the hole to ensure it expanded downwards toward the flat spot on the canopy. The original hole for the grommet is very near a sharp curve in the surface and you do not want the hole expanding into that curved area. I recommend using the reamer to expand the hole to 8mm then using some rolled up sandpaper to smooth the edges of the hole and expand it to about 8.5mm Attached Thumbnails

05-14-2016, 09:27 PM	#1084 (permalink)
crashcopterman Registered Users Join Date: Feb 2012 Location: Grande Prairie, Alberta Canada	Zoom zoom! Sent from my iPhone using Tapatalk __________________ Nano CPX \|\| 130X \|\| 230S II 450 3D converted to 450X \|\| 360CFX \|\| 480 Fusion II 550X \|\| Oxy 5 MEG \|\| ALeeS Rush 700 Evolution \|\| Goblin 770 Sport 'My flight style, determines my crash style"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in