START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
CJY Total-G FBL System Curtis Youngblood Total-G FBL Flybarless System Software and Hardware Support |
|
LinkBack | Thread Tools | Display Modes |
10-06-2012, 09:28 PM | #1 (permalink) |
Registered Users
Join Date: Aug 2011
|
Total g with external rx help!!
I am hooking my total g up with my optima 6. I am having problems getting them to sync together. I have followed the instructions word for word. Anyone have a tutorial or some pointers for me? I have it all hooked up correctly however when I click "external rx" on the program, and turn off rx and tx then turn back on. It he light doesn't turn yellow.
|
Sponsored Links | |||
Advertisement |
|
10-06-2012, 11:46 PM | #2 (permalink) |
Registered Users
Thread Starter
Join Date: Aug 2011
|
I keep getting tx off error then it lets me select external rx. But I don't get any further than that
|
10-07-2012, 01:57 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Aug 2011
|
Do I need the esc/power plugged into the Y connector or to the throttle channel on the TG?
|
10-07-2012, 10:47 AM | #4 (permalink) |
Registered Users
Join Date: Nov 2007
|
Hi,
You connect the ESC to the throttle channel on the TG. The Y connector is to power on the TG. - http://curtisyoungblood.com//TotalGS...tions%20V2.pdf Regards Esteban |
10-07-2012, 10:57 AM | #5 (permalink) |
Registered Users
Join Date: Nov 2007
|
If your ESC doesn´t have internal bec, you must use a external power source connected to the Y connector.
Last edited by wally; 10-08-2012 at 01:58 PM.. |
10-07-2012, 02:29 PM | #6 (permalink) |
Registered Users
Join Date: Nov 2008
|
You need to power your receiver. The TotalG will get it's power from the Y harness also. I found that I needed to have everything wired up for the TotalG to recognize the external receiver. I fly Airtronics with an external receiver. I have one lead from the BEC Pro going to channel 8 and then power to the TotalG power port with a heavy duty servo extension from channel 7 which I also use to adjust FC gain from the transmitter. The other lead from the BEC goes to the TotalG governor port.
__________________
Paul Agile 5.5 - Q 4125-1100, YEP 120, Brain2 HD FBL / Outrage 550 - HK4020-1390, Edge 120, Brain2 HD Rave Ballistic FSO - Q 4530-500, Edge 160HV, Brain2 HD / Protos Max V2 - MSH 4530-500, Edge 160HV, Brain2 HD |
10-07-2019, 06:27 PM | #7 (permalink) |
Registered Users
Join Date: Sep 2019
Location: Afghanistan
|
Total g with external rx help
Thanks for all the help. Yes, Id be interested in any drives. I really dont know about the case, but i do think it has a fan. I cant see it not having one and running for as long as this drives been running. Im not good at taking things apart, so I really cant do anything there. How mutch are external cases? Could I take an old 20 gb hd out of an old computer in my garage and turn it into another external hd? Thanks again for the help.
|
Thread Tools | |
Display Modes | |
|
|