In coming nx4, which servos?

[pugdavey]

Just getting a nx4 and don't know whether these are any good hyperion HP-DH16-GCD or just go with aligns ?

Also any things I need to know about in the build ?

Cheers
Martin


Sent from my A210 using Tapatalk

[Jeff_Barrett]

Go with the DH16-FTD as the cyclics/throttle and the DH16-GCD as the tail if you're going the Hyperion route. The GCD is a carbon poly gear set designed for the tail. The FTD is a titanium metal gearset design for the stresses that are put on the cyclic servos.

I have MKS HV9767 cyclics/throttle and MKS HV9780 as the tail.

[pugdavey]

Cheers Jeff got some aligns coming I found s/h. Can't wait to get a nitro back in the air ;-)

Sent from my A210 using Tapatalk

[Matt Nasca]

These work great! and 1257MG for Rudder and throttle

[Frostwick]

how do you power those savox 1250 servos?

[jaofos]

I'm running the Savox servo's, same as Matt, direct from a LiFe pack.

[RontaryUS]

Align ds515m and ds525m are ones of the best 'budget' servos. Running those on the Nx4 without issues. There are some best ones for sure though.

[bgymr]

Did you end up going iwth the Hyperion HV servos?

[Jeff_Barrett]

Originally Posted by bgymr

Did you end up going iwth the Hyperion HV servos?

MKS HV9767/9780 is the way I went. Loving them!

[pugdavey]

Ended up with spektrum on cyc 520 on throttle and gaui for the tail all off a 1100mah life pack.

Sent from my XT1052 using Tapatalk

[timmytron]

I've changed my cyclics over from the Futaba 9650's to the BK DS5001HV's.

Running on 6V to start until I change the tail and throttle servo out to HV's as well.

I got sick of the plastic gears in the 9650's stripping so easily in a small tip over or something. The performance of the BK's is super wild and is exactly what I want in this machine. I've flown a few flights so far with them and love it dearly. Time will tell if the exposed servo motors and oil residue build up will be a problem.