START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Align 3G FBL System Align 3G FBL Flybarless System Software and Hardware Support |
|
LinkBack | Thread Tools | Display Modes |
11-19-2012, 11:37 PM | #1 (permalink) |
Registered Users
Join Date: Feb 2010
|
Another 3G Tail Wag Issue
OK Heli Gurus, I need help. I have a 3G on my 450 Sport and no matter what I do I cannot get rid of my constant tail wag - here is what I tried:
Made sure belt was plenty tight Made sure t-pitch slider was smooth Made sure no binding in t-servo pushrod Gyro gain set on Aux2 with endpoints Moved ball on servo arm both in and out Set the gains all over the map. This is running wiht a Futaba 9257. Any bright ideas/suggestion would be much appreciated. Thanks
__________________
RC Heli Pilot = Control Freak |
Sponsored Links | |||
Advertisement |
|
11-20-2012, 01:34 PM | #2 (permalink) | |
Registered Users
Join Date: Nov 2009
|
Quote:
You can also tighten the belt to much and cause escessive vibes. With the tip of a driver the belt pushed to the centerline of the boom with moderate pressure is about the proper tension
__________________
Align 450Pro 3GX, 500ESP/DFC 3GX, 500L, 550 DFC MicroBeast , Velocity 50 Vbar OS55 HZ-R, D380 DFC D420, G500 Sport Microbeast, All HW V4, X5 stretch 220 Flame Emax Bullet Force V2 VTX |
|
11-21-2012, 12:27 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2010
|
Bad, thanks for the tip I will give this a try.
__________________
RC Heli Pilot = Control Freak |
11-23-2012, 05:48 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2010
|
Loosening the belt a bit did the trick -thanks
__________________
RC Heli Pilot = Control Freak |
11-24-2012, 09:05 AM | #5 (permalink) |
Registered Users
Join Date: Nov 2009
|
Your welcome.
LOL, that's why I went to all TT. Got tired of checking and adjusting the belt everytime the temps changed.
__________________
Align 450Pro 3GX, 500ESP/DFC 3GX, 500L, 550 DFC MicroBeast , Velocity 50 Vbar OS55 HZ-R, D380 DFC D420, G500 Sport Microbeast, All HW V4, X5 stretch 220 Flame Emax Bullet Force V2 VTX |
Thread Tools | |
Display Modes | |
|
|