Register Now

Jackass1277 · 10-07-2013, 06:00 PM

im thinking about getting a n1 and was wondering about what it took to upgrade to a n2?

p00rboi · 10-09-2013, 01:43 PM

New side frames (servos are installed to the frame instead of an electronics tray), new tail rotor assembly (identical to the Fusion 50)....I think that's the bulk of it.

rob221 · 10-14-2013, 01:04 AM

Unfortunately that's not correct having already accomplished the change this is what you will need
Frames,base plate,bottom mounts,forward gyro tray spacer for 1 servo,New rear rudder arm and mount,New shorter rod from tail servo,New push rod from tail new flange bearings New servo rods,New belcranks to match n2 elevater arm ,New larger diameter 120 control arm,additional m3 frame spacers, as for the tail I am using the original with no problems

10-07-2013, 06:00 PM	#1 (permalink)
Jackass1277 Registered Users My HF Map location Join Date: Aug 2011	what are the differences betweenthe n1 and n2 im thinking about getting a n1 and was wondering about what it took to upgrade to a n2? __________________ Goblin 700 Ikon 560ult cc160hv Scale Bell 222 T700, Agusta A109 Grand 700 Blue Thunder 700 RCHN #365 G500,E5 12s,600np dfc, t500 dfc beater

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-09-2013, 01:43 PM	#2 (permalink)
p00rboi Registered Users My HF Map location Join Date: Jun 2006	New side frames (servos are installed to the frame instead of an electronics tray), new tail rotor assembly (identical to the Fusion 50)....I think that's the bulk of it.

10-14-2013, 01:04 AM	#3 (permalink)
rob221 Registered Users Join Date: Jun 2010	Unfortunately that's not correct having already accomplished the change this is what you will need Frames,base plate,bottom mounts,forward gyro tray spacer for 1 servo,New rear rudder arm and mount,New shorter rod from tail servo,New push rod from tail new flange bearings New servo rods,New belcranks to match n2 elevater arm ,New larger diameter 120 control arm,additional m3 frame spacers, as for the tail I am using the original with no problems

Register Now

Log-in