Register Now

photocycler · 03-16-2012, 10:33 PM

Trying to setup my MSH 60A YGE, when I plug in the lipo, it flashes and no beeps...any idea what the issue could be? Battery is charged and motor is not connected

bdbrown4764 · 03-16-2012, 11:16 PM

Motor has to be connected, it is what produces the beeps.

wolfdown · 03-17-2012, 01:32 AM

I had this (no beeps with motor connected). Turned out to be a driver gone bad. Had to send it back to YGE for a replacement unit.

wolfdown · 03-17-2012, 01:54 AM

double post

photocycler · 03-17-2012, 09:12 AM

I'll plug the motor in and try,I just thought it was safer to setup the esc with the motor unplugged

photocycler · 03-17-2012, 11:41 AM

Ok I turned it on with full throttle to set the throttle 100%, it gave confirmation beeps but just keeps blinking...wny idea what this could be?

Ecaf · 03-17-2012, 05:29 PM

Quote:

Originally Posted by photocycler

Ok I turned it on with full throttle to set the throttle 100%, it gave confirmation beeps but just keeps blinking...wny idea what this could be?

Sounds like you are in programming mode.

Is this an MSH branded ESC? You don't need to set anything if so, its already set to endpoint discovery and Gov mode.

More help here:

http://www.elektrorc.com/articles.php

photocycler · 03-18-2012, 12:35 PM

Yes its a MSH branded YGE ESC,

So it seems to be stuck in the error code mode, I have tried resetting it multiple times and it wont get rid of the error code

http://www.youtube.com/watch?v=OZLHP...ature=youtu.be

03-16-2012, 10:33 PM	#1 (permalink)
photocycler Registered Users Join Date: Oct 2010	Not Getting Beeps Trying to setup my MSH 60A YGE, when I plug in the lipo, it flashes and no beeps...any idea what the issue could be? Battery is charged and motor is not connected

03-17-2012, 01:32 AM	#3 (permalink)
wolfdown Registered Users Join Date: Oct 2009	I had this (no beeps with motor connected). Turned out to be a driver gone bad. Had to send it back to YGE for a replacement unit. __________________ Rush 750 w/ Xera 4530-500 (12T), YGE160HV, WR S.BEC, Torq 9180/9188, AR7200BX Outrage 550 w/ Scorp 4020-1390 (13T), YGE120, CC BEC Pro, Quark, MKS BLS980, Futaba BLS451

03-17-2012, 01:54 AM	#4 (permalink)
wolfdown Registered Users Join Date: Oct 2009	double post __________________ Rush 750 w/ Xera 4530-500 (12T), YGE160HV, WR S.BEC, Torq 9180/9188, AR7200BX Outrage 550 w/ Scorp 4020-1390 (13T), YGE120, CC BEC Pro, Quark, MKS BLS980, Futaba BLS451

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-16-2012, 11:16 PM	#2 (permalink)
bdbrown4764 Registered Users Join Date: Jun 2010 Location: Usa, Ca, North Fork	Motor has to be connected, it is what produces the beeps.

03-17-2012, 09:12 AM	#5 (permalink)
photocycler Registered Users Thread Starter Join Date: Oct 2010	I'll plug the motor in and try,I just thought it was safer to setup the esc with the motor unplugged

03-17-2012, 11:41 AM	#6 (permalink)
photocycler Registered Users Thread Starter Join Date: Oct 2010	Ok I turned it on with full throttle to set the throttle 100%, it gave confirmation beeps but just keeps blinking...wny idea what this could be?

03-18-2012, 12:35 PM	#8 (permalink)
photocycler Registered Users Thread Starter Join Date: Oct 2010	Yes its a MSH branded YGE ESC, So it seems to be stuck in the error code mode, I have tried resetting it multiple times and it wont get rid of the error code http://www.youtube.com/watch?v=OZLHP...ature=youtu.be

Register Now

Log-in