Roban Superscale AH1 Super Cobra

[keong]

sorry not meaning to hijacking...just share this same thread so no need to open new thread... hope its okay for u ...here;s my cobra super scale 700

setup

Spin Blade 710mm scale asymmetrical
Hobbywing 120HV esc running on stock governor ( timing 0 , pwn 12khz )
Leopard 460kv
kSt servos
hobbymate FBL , (tried to fix a Silverline Vbar but the tail cant hold well..keep wagging)
BEC hercules western robotics HV
5000mah 12s
2200 3s for BEC
120mm RJX tail blade...105mm seems not enough

take off flying nett weight 7.68kg

flight time about 7mins ( still have 3.83v each cells after 7 mins ) . Thinking to fixing a cooling fan as after 7 mins the motor n esc quite hot... as there;s no cooling compartment design for this model..any can give some ideas?

beside is a 600size dfc looks tiny beside a Cobra...

[Calil]

Originally Posted by keong

sorry not meaning to hijacking...just share this same thread so no need to open new thread... hope its okay for u ...here;s my cobra super scale 700

setup

Spin Blade 710mm scale asymmetrical
Hobbywing 120HV esc running on stock governor ( timing 0 , pwn 12khz )
Leopard 460kv
kSt servos
hobbymate FBL , (tried to fix a Silverline Vbar but the tail cant hold well..keep wagging)
BEC hercules western robotics HV
5000mah 12s
2200 3s for BEC
120mm RJX tail blade...105mm seems not enough

take off flying nett weight 7.68kg

flight time about 7mins ( still have 3.83v each cells after 7 mins ) . Thinking to fixing a cooling fan as after 7 mins the motor n esc quite hot... as there;s no cooling compartment design for this model..any can give some ideas?

beside is a 600size dfc looks tiny beside a Cobra...

Keong

Would you have a video from this Cobra to share? I'm very curious about those asymmetrical blades working!

[Donaldus57]

Hello fellow Heli Flyers

I need a copy from the Apache Building Plan for a Trex 700 - 800

Can someone help me ? The plan should have all Measurements listed

My email Address Donaldus57@online.de

Thx

Don

[RFCXPerT]

Originally Posted by keong

sorry not meaning to hijacking...just share this same thread so no need to open new thread... hope its okay for u ...here;s my cobra super scale 700

setup

Spin Blade 710mm scale asymmetrical
Hobbywing 120HV esc running on stock governor ( timing 0 , pwn 12khz )
Leopard 460kv
kSt servos
hobbymate FBL , (tried to fix a Silverline Vbar but the tail cant hold well..keep wagging)
BEC hercules western robotics HV
5000mah 12s
2200 3s for BEC
120mm RJX tail blade...105mm seems not enough

take off flying nett weight 7.68kg

flight time about 7mins ( still have 3.83v each cells after 7 mins ) . Thinking to fixing a cooling fan as after 7 mins the motor n esc quite hot... as there;s no cooling compartment design for this model..any can give some ideas?

beside is a 600size dfc looks tiny beside a Cobra...

What is the max battery size WxH to fit both side by side inside? Will 50x56mm Turnigy HD 5000mah fit side by side?

Thanks

[zuizehely]

Can a 12S 5000mah stick pack 332x52x49mm fit inside without any issues? Or they have to be side by side?

Thanks

[ssmith512]

Originally Posted by zuizehely

Can a 12S 5000mah stick pack 332x52x49mm fit inside without any issues? Or they have to be side by side?

Thanks

Wont fit. 6S packs must be placed side by side.

[skydve77]

Any tips?