Register Now

whirlinwilly · 02-19-2009, 10:33 PM

does any mfgr make a 90 degree 3.5mm mono adapter for Spectrum DX7 tx's so the sim cable does not come straight out the back? Mine keeps getting bent when the TX is laid on its back. tks
whirlinwilly

widower · 02-20-2009, 12:37 AM

The Phoenix cable has a 90deg connector. It's a standard stereo connector so I would think you could find a female to male cable or adapter at Radio Shack or equivalent.

whirlinwilly · 02-20-2009, 09:19 PM

I found a stereo one at radio shack but when you plug it is it causes a short because it is stereo and blows the fuse in the TX . It has to be a 90 degree mono. Tks for your suggestion.

02-19-2009, 10:33 PM	#1 (permalink)
whirlinwilly Registered Users Join Date: Dec 2007	Reflex sim cable does any mfgr make a 90 degree 3.5mm mono adapter for Spectrum DX7 tx's so the sim cable does not come straight out the back? Mine keeps getting bent when the TX is laid on its back. tks whirlinwilly

02-20-2009, 12:37 AM	#2 (permalink)
widower Registered Users My HF Map location Join Date: Jan 2008	The Phoenix cable has a 90deg connector. It's a standard stereo connector so I would think you could find a female to male cable or adapter at Radio Shack or equivalent. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2009, 09:19 PM	#3 (permalink)
whirlinwilly Registered Users Thread Starter Join Date: Dec 2007	I found a stereo one at radio shack but when you plug it is it causes a short because it is stereo and blows the fuse in the TX . It has to be a 90 degree mono. Tks for your suggestion.

Register Now

Log-in