DSM2/DMSX with the DC/DS 16

[Dansy]

Anybody tried a JR DMSS module to Jeti?

I got the Ninja Quad for Christmas and it need DMSS.......so that would be my only solution.

[Dansy]

I got the pins from Hobbyking.....

[drjay]

got it, have crimping supplies, will individually use pins with the hot glue trick...

[scott s]

deleted

[BorisFF]

Spektrum center is 1520 uS
Spektrum -100% is 1120 uS -150% is 920uS
Spektrum +100% is 1920 uS +150% is 2120 uS

This means in JETI servos setup, put
servo center +8%
max negative -80%
max positive +80%
max negative limit -100%
max positive limit +100%

Output in uS can be checked in servo monitor, with above values,
you will be close Spektrum data.

[BorisFF]

Just thinking that with latest Spketrum TXs, used in
wireless TRAINER mode, there might
be possible to bind the jeti/rstat/orangeTX spektrum bridge
as a TRAINEE spektrum TX (trainee throttle must be -100% at bind time,
apparently, so may be necessary to have servo 1 output at least -80%
in jeti TX at bind time)
Anyone already tryed ?

[TheMark]

A bit of a necro-bump here.. but I'm really struggling with getting my mCPX setup in my DS14. I've tried all the configurations listed on jetiforum.de, as well as ones listed early on in this thread... the servos just aren't doing what they are supposed too. The Servo assignments do absolutely nothing, at least if I let it auto-configure... some servos move (albeit incorrectly)

Can anyone provide some screenshots of their setups? I'm putting together a MS Word doc with all the settings as I find working ones. I was going to start a new thread here for keeping these settings in a central place.

Edit: I'm using an R4 lite, does the DM9 need to be plugged into a certain port on the receiver?

Thanks in advance.

[TheMark]

Nobody? 😢

Edit: I finally figured it out and will be posting my final setup once I settle on a tune.

[Krea]

I'm thinking of going Jeti and will need to do this for my small planes and 180cfs. Any updates to the process?

[Eury]

It's not hard to do. Only issue I have is bringing my $1500 radio out to fly a $80 BNF plane seems stupid. Ended up buying a new DX6 and my bridge box just sits around now.

[Bonkievan]

Originally Posted by Gearswinger

It's not hard to do. Only issue I have is bringing my $1500 radio out to fly a $80 BNF plane seems stupid. Ended up buying a new DX6 and my bridge box just sits around now.

+1 with this. I kept my Dx8 for exactly the above reason.

[Only Fine Helis]

Makes sense to me as well.

[Puttputt maru]

Originally Posted by Gearswinger

It's not hard to do. Only issue I have is bringing my $1500 radio out to fly a $80 BNF plane seems stupid. Ended up buying a new DX6 and my bridge box just sits around now.

May be but the feel is definetly way different. Jeti gimbal are second to none in my book so far. I even use my DC-16 for the simulator. The Hall sensor will never (supposedly) wear out so why not use it.

[Eury]

Agreed. However, how much feel and resolution do I need to fly my Night Vapor in the backyard while having a beer? Anything larger than the UMX stuff gets a Jeti rx.