Adjusting sensitivity??

[rz1a]

Maidened my mini Titan with gt5.1 and its very sensitive on cyclic input and doesn't hover well either.

What menu do I enter? Is this under Feed Forward? # for FF is on 50 When I hover it doesn't seem too stable. Hover # is already on 4

[rz1a]

Or is it stick menu/expo swash plate or swashplate stick dynamic

[rz1a]

Okay think I got it now with adjust the above menus.

[c550]

What did you adjust. It seems like I have a similar problem.

Thanks,

Dave

[rz1a]

I ended up pulling the fbl off. I have an ar7200bx on it now

[dophuc]

Originally Posted by rz1a

Maidened my mini Titan with gt5.1 and its very sensitive on cyclic input and doesn't hover well either.

What menu do I enter? Is this under Feed Forward? # for FF is on 50 When I hover it doesn't seem too stable. Hover # is already on 4

I think your agility too high so its very sensitive. You can setup agility from Pitch travel& agility menu
Set-up: Pitch travel & agility:
Enter this parameter via the swash-plate icon.In this menu item, it’s possible to alter the overall speed of the cyclic feel (control-rate) using the aileron and elevator icons. Default values are 100%. A lower value will make the heli react slower to cyclic inputs. With a higher value, the heli will react faster. Suggest starting with a value of 100% and increase or decrease as necessary. (Suggest less experienced pilots start with a value here of 80%).

You also need to read manual GT5.1 carefully, step by step.The manual is very detail, include hints to setup GT5 & GT5.1

[Laurens]

Lower your ATV's in your Tx, and lower feed forward too. This will help a lot. Also, set your expo in your Tx instead of GT5. In the GT5 you only set it for the complete swashplate, in your Tx you can set it for your roll and nick individually.