a9 help

[nick.m]

ok so im setting up a trex 600n for a friend and noticed that the aileron servo moves more than the pitch and elevator when pitching up and less when pitch down but there all level at mid stick, so checked the heli over all bellcranks and servo wheels are at 90 so all looks good so i goto the monitor screen in the radio and notice that when i move the cyclik stick full forward and backwards that aileron and pitch servos are showing different levels on the monitor screen and im sure they should be the same so does any one have any ideas
thx nick

[A.T.]

Originally Posted by nick.m

ok so im setting up a trex 600n for a friend and noticed that the aileron servo moves more than the pitch
and elevator when pitching up and less when pitch down but there all level at mid stick,
so checked the heli over all bellcranks and servo wheels are at 90 so all looks good so i goto the monitor screen
in the radio and notice that when i move the cyclik stick full forward and backwards that aileron and pitch servos are showing
different levels on the monitor screen and im sure they should be the same so does any one have any ideas thx nick

Quite important to setup in correct order and not go back and adjust an item which will impact other mixes.
Suggest start under a new model number following:
. Aurora 9 - Programming Problem? - Parameters must be set in correct ordere.g. V_tail, see chart.

and especially follow:
.
Aurora 9ch - Video - Helicopter Set Up - Finless Bob's Review, Tips and how To - Series.
(also full of many handy pointers for Acro and other users). Bob's Video Library Index.pdf

If above does not resolve the problem, refer direct to:
Hitec Warranty & Service - homepage.
Note: Hitec USA only services North/South America and Canada.
"Hitec USA customer service department is available Monday through Friday*
from 7am- 4:30 pm Pacific time. Reach us at 858.748.8440 or
service@hitecrcd.com any time you have a question"
• If you are from a country that is outside North and South America, please contact the
Hitec distributor in your country for service.

ex Hitec USA Support Forum Sticky:
Aurora 9, AFHSS 2.4Ghz Module, Transceivers_Receivers & Telemetry,
- FAQ, Setups & Tips

Alan T.
Alan's Hobby, Model & RC FAQ Web Links