Register Now

yowser · 02-05-2012, 09:32 PM

Woohoo! Got 32 oz through her today. Flew great, really happy so far. Only turning 1450 on the head and very stable. Gonna get another 32 through and turn it up a little next weekend.

AlvaSpeed · 02-05-2012, 09:59 PM

What mods did you do to stretch the 600 to 700?

yowser · 02-05-2012, 10:32 PM

Use the torque tube from the .90, .90 tailboom that you cut down 40mm and re notch. You will need 105's for the tail. There is a good thread by member rototerrier, that is the one I followed. He had trouble with the clutch from the original conversion. The new clutch is said to be good, I am using the hd lynx gasser clutch with no problems. It is pretty light too.

02-05-2012, 09:32 PM	#1 (permalink)
yowser Registered Users Join Date: Apr 2009	Helibug 600 stretched flights today Woohoo! Got 32 oz through her today. Flew great, really happy so far. Only turning 1450 on the head and very stable. Gonna get another 32 through and turn it up a little next weekend. __________________ Logo 500 mini vbar

02-05-2012, 10:32 PM	#3 (permalink)
yowser Registered Users Thread Starter Join Date: Apr 2009	Use the torque tube from the .90, .90 tailboom that you cut down 40mm and re notch. You will need 105's for the tail. There is a good thread by member rototerrier, that is the one I followed. He had trouble with the clutch from the original conversion. The new clutch is said to be good, I am using the hd lynx gasser clutch with no problems. It is pretty light too. __________________ Logo 500 mini vbar

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-05-2012, 09:59 PM	#2 (permalink)
AlvaSpeed Registered Users Join Date: Nov 2009	What mods did you do to stretch the 600 to 700?

Register Now

Log-in