Register Now

rcfreek · 08-09-2015, 02:30 AM

Im thinking of buying this gyro for a NIB goblin 700 comp to be setup on my 28X. Anybody have any experience with it?

treotraveler · 08-09-2015, 05:03 PM

Quote:

Originally Posted by rcfreek

Im thinking of buying this gyro for a NIB goblin 700 comp to be setup on my 28X. Anybody have any experience with it?

Here is a setup video for tags01....

TAGS01 Set up guide / Scott Gray (22 min 36 sec)

Here is online manual download...

http://www.jrpropo.com/english/dl/da...UserManual.pdf

Did you give up on BeastX?

LaDon · 08-09-2015, 08:23 PM

The tags 01 has been discontinued. They have replaced it with the mini tags. To use the mini you will have to use the reciever adapter and a regular xbus reciever. The tags if you have it is fine but on it the gyro is not compatible with xbus. On it you will have to use the Pwm outputs and run jumper wires for all channels

Ah Clem · 08-14-2015, 11:30 AM

I have the TAGS-Mini installed in my Forza 700. I used an RG731BX with long range satellite and X-Bus (X-Bus simplified the wiring greatly). There are downloadable parameters for the Forza 450 and 700 available from JR, which, in the case of the 700 were pretty spot-on (I have not tried them for the 450, as I have a V-Bar with X-Bus on the 450).

The setup is quite different, but easy to do (a bit of a learning curve, just as with any FBL unit). The gains for cyclic and the tail can be set up in the transmitter and controlled by the Flight Mode switch (bank switching).

The TAGS-Mini has a nice, fluid feel to it (reminds me of V-Bar). I like it enough that I purchases a second one.

detue · 09-08-2015, 04:35 AM

I think nowadays you want to go for the TAGSmini.

BTW, it got upgraded and is sold with a diversity and full range telemetry remote antenna ("satellite") which makes a dedicated receiver obsolete even for large models and reduces the overall price tag quite a bit.

Four Stroker · 09-08-2015, 03:23 PM

You mean this setup ?

http://www.jrpropo.co.jp/english/pro...db_flg=eng_db1

Apparently not available in the USA.

LaDon · 09-09-2015, 09:21 PM

Yep that one will work. It is available in pieces in the US. You would get the tags mini and then RA02TL separately and then plug it in. You would have the same thing as that then. You can buy both at JR Americas

08-09-2015, 02:30 AM	#1 (permalink)
rcfreek Registered Users Join Date: Feb 2007	Anyone used the TAGS01 gyro yet? Im thinking of buying this gyro for a NIB goblin 700 comp to be setup on my 28X. Anybody have any experience with it?

08-09-2015, 08:23 PM	#3 (permalink)
LaDon Registered Users Join Date: Mar 2012	The tags 01 has been discontinued. They have replaced it with the mini tags. To use the mini you will have to use the reciever adapter and a regular xbus reciever. The tags if you have it is fine but on it the gyro is not compatible with xbus. On it you will have to use the Pwm outputs and run jumper wires for all channels __________________ Team Jr Americas

08-14-2015, 11:30 AM	#4 (permalink)
Ah Clem Registered Users Join Date: Jan 2006	I have the TAGS-Mini installed in my Forza 700. I used an RG731BX with long range satellite and X-Bus (X-Bus simplified the wiring greatly). There are downloadable parameters for the Forza 450 and 700 available from JR, which, in the case of the 700 were pretty spot-on (I have not tried them for the 450, as I have a V-Bar with X-Bus on the 450). The setup is quite different, but easy to do (a bit of a learning curve, just as with any FBL unit). The gains for cyclic and the tail can be set up in the transmitter and controlled by the Flight Mode switch (bank switching). The TAGS-Mini has a nice, fluid feel to it (reminds me of V-Bar). I like it enough that I purchases a second one. __________________ KBDD-Team Captain, JR DFA Team Pilot. Forza 450, Forza 600N, Forza 700, Compass 6HV-U, Warp, 7HV,Knight Pro,Knight 3D, Atom, Odin II, 6HV, 3D Plus, Knight 50, Chronos, Velos, Steam 550 and 600, OMP M2 (and anything else I can get my hands on...).

09-09-2015, 09:21 PM	#7 (permalink)
LaDon Registered Users Join Date: Mar 2012	Yep that one will work. It is available in pieces in the US. You would get the tags mini and then RA02TL separately and then plug it in. You would have the same thing as that then. You can buy both at JR Americas __________________ Team Jr Americas

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-08-2015, 04:35 AM	#5 (permalink)
detue Registered Users Join Date: Feb 2015	I think nowadays you want to go for the TAGSmini. BTW, it got upgraded and is sold with a diversity and full range telemetry remote antenna ("satellite") which makes a dedicated receiver obsolete even for large models and reduces the overall price tag quite a bit.

09-08-2015, 03:23 PM	#6 (permalink)
Four Stroker Registered Users Join Date: Jan 2009 Location: Atlanta	You mean this setup ? http://www.jrpropo.co.jp/english/pro...db_flg=eng_db1 Apparently not available in the USA.

Register Now

Log-in