Register Now

<3My480Pro · 10-21-2011, 04:36 AM

I'm having a bit of a problem setting up my Hyperion DS09gmd to the sk720 and I was wondering if you guys could help. I've just gotten done finish setting all the wizards and the tail servo seems like it isnt working right. With both the transmitter and receiver power on and zero movement to the heli the tail kept turning one direction. I've gone through all settings and everything is setup correctly. Servo is set at 270/1520. On the sk720 the tail servo is set at 333/1520. Was wondering if the could be the problem? Thanks in advance guys.

georgi UK · 10-21-2011, 10:41 AM

=] this is normal for heading hold, the gyro is looking for a tail change and keeps adding tail pitch because the heli isn't moving or responding.

if you run at 333Hz and the servo seems to be getting hot its better to drop this to 250Hz as its only rated at 270Hz.

<3My480Pro · 10-21-2011, 02:14 PM

Oh I see. Also while setting up the tail servo I notice that the tail servo twitches and re-center every 6 sec, is this normal too?

georgi UK · 10-21-2011, 02:32 PM

=] also yes. this is normal in setup mode. it sounds like it's resetting itself every so often and nothing to worry about!

<3My480Pro · 10-21-2011, 10:34 PM

awesome thanks gmcallister. everything is working perfectly

10-21-2011, 04:36 AM	#1 (permalink)
<3My480Pro Registered Users Join Date: Jan 2011	Hyperion ds09gmd and sk720 I'm having a bit of a problem setting up my Hyperion DS09gmd to the sk720 and I was wondering if you guys could help. I've just gotten done finish setting all the wizards and the tail servo seems like it isnt working right. With both the transmitter and receiver power on and zero movement to the heli the tail kept turning one direction. I've gone through all settings and everything is setup correctly. Servo is set at 270/1520. On the sk720 the tail servo is set at 333/1520. Was wondering if the could be the problem? Thanks in advance guys.

10-21-2011, 10:41 AM	#2 (permalink)
georgi UK Join Date: Mar 2007	=] this is normal for heading hold, the gyro is looking for a tail change and keeps adding tail pitch because the heli isn't moving or responding. if you run at 333Hz and the servo seems to be getting hot its better to drop this to 250Hz as its only rated at 270Hz. __________________

10-21-2011, 02:32 PM	#4 (permalink)
georgi UK Join Date: Mar 2007	=] also yes. this is normal in setup mode. it sounds like it's resetting itself every so often and nothing to worry about! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-21-2011, 02:14 PM	#3 (permalink)
<3My480Pro Registered Users Thread Starter Join Date: Jan 2011	Oh I see. Also while setting up the tail servo I notice that the tail servo twitches and re-center every 6 sec, is this normal too?

10-21-2011, 10:34 PM	#5 (permalink)
<3My480Pro Registered Users Thread Starter Join Date: Jan 2011	awesome thanks gmcallister. everything is working perfectly

Register Now

Log-in