START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
mSR X Blade Micro SRX Helicopters Information and Help |
|
LinkBack | Thread Tools | Display Modes |
03-30-2012, 04:21 PM | #1 (permalink) |
Registered Users
Join Date: Mar 2012
|
Msr-x DX7 programing?
I really wish that HH took the time to put this DX7 programing information in the manual like the mcp-x has, I cant find any informatin on the msr-x, ive seen plenty on the msr but not sure if its the same.
I need to know the swash type? and then after that i should be able to fly it without any other settings? i dont know? first time with a computer heli Tx, Ive been flying using a DX4e with no settings capability. I do want to get this msr-x dialed in so any help would be appreciated. Thanks. |
Sponsored Links | |||
Advertisement |
|
03-30-2012, 05:05 PM | #2 (permalink) |
Registered Users
Join Date: Feb 2012
|
This thread will give you a starting ground. Mainly in how to set up the rudder mixes.
But basically you just select a 90 degree swash and leave everything else stock - save for any expo you want to add. |
03-30-2012, 06:42 PM | #3 (permalink) |
Registered Users
Join Date: Mar 2012
|
I use these settings on mine, and it flies very smooooth
D/R EXPO AILE (50%) (-10%) ELEV (50%) (-10%) RUDD (100%) (INN) MIX 1 RUDD→ ELEV (ACT) RATE D -10% U -10% SW (ON) TRIM (INN
__________________
DX7S: mCPX.v1or2 mSRX 120sr mCX |
04-03-2012, 01:34 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Mar 2012
|
Nice I should have realized that i could have used some of the dx6i setups around here, never even thought to look. now I know when I get a 450!
What does the program mix do? is it activated by enabling it in the menu or a switch? im also having a hard time with the mix setup, MIX 1 RUDD→ ELEV (ACT) RATE D -35% U -25% were do these values go SW (ON) TRIM (INN MIX 2 RUDD→ ALIE (ACT) RATE L -40% R -10% were do these values go SW (ON) TRIM (INN Do the rates values go(D,L) on top and (U,R) on bottom? on this screen ? |
04-03-2012, 03:30 PM | #5 (permalink) | |
Registered Users
Join Date: Feb 2012
|
I have the same radio and same question as you.
Quote:
|
|
04-03-2012, 08:15 PM | #6 (permalink) | ||
Registered Users
Join Date: Feb 2012
|
Sticky This !
OK Guys only mod is that I switched the stock tail boom and motor with a stock mcpx tail boom and motor. I used the msrX tail fin.
And I improvised theses setting for my old DX7 radio. It is very very tame in normal mode and a blast is sport. The tail holds like a son of B and it turns left as it should while hovering . The Video will be live (EDIT), Sorry for the real bad guilty but it's a cell phone so its the best I can do.
Note the need for the use of the gear switch in my setup. |
||
04-04-2012, 06:36 PM | #7 (permalink) |
Registered Users
|
Sorry I haven't got longer to help, have a look at my post in here
https://www.helifreak.com/showthread.php?t=390194 I was struggling to translate DX6i mixes to the DX8 which I guess is the same as the DX7S The mixes can be left on permanently, I had mine switched for testing, do try the link adjustment first detailed in the sticky at the top of this forum Once the links are adjusted well, I think that mixes are far less important - still worth a play |
02-13-2015, 04:48 PM | #8 (permalink) | |
Registered Users
Join Date: Jan 2015
|
Quote:
|
|
Thread Tools | |
Display Modes | |
|
|