Post your Protos Videos here

[t-rexn8]

Please check out my Protos


http://www.youtube.com/user/trexn8#p/a/u/0/RfC-uLJ2MSw

Regards,

Nathan

[African tonic]

Hi guys here are two flight of my protos with flightmax 6s 40c from hobbycity

[OnTheSnap]

Here's a winter flight on my vbar Protos. This was on old tired 30C Turnigy 6s LiPos.

[ame]http://www.youtube.com/watch?v=TcthNSyOTdw[/ame]

[whisperdancer]

@ OnTheSnap: It seems your belt is pretty tight. The blades stop very quickly. Nice flight.

@ African tonic: nice to see more videos from you. The ones before already were very good.

[nessie]

drunk fly !

[ame]http://www.vimeo.com/9111604[/ame]

if you know how to reduce vibrations when camera is back on the tail, please share your knowledge !

[naitor]

Hi this is a protos from Thailand
[ame]http://www.youtube.com/watch?v=rI1Q4BjEPc0[/ame]

[African tonic]

@ African tonic: nice to see more videos from you. The ones before already were very good.[/QUOTE]

Thanks Whisperdancer

[Mrktplayer]

Gettin ready for the new season...
[ame]http://www.youtube.com/watch?v=Iu0gzaSNGgo&feature=player_embedded[/ame]

[nessie]

thanks Mrktplayer, real nice 3d video. a lot of pleasure to watch it.
congrats (sincerely)
----
a little onboard video from France. weather is going back to human temperatures...

[ame]http://www.vimeo.com/9504038[/ame]

[dfraser]

The story so far, of my new protos:



It's been a great process so far. A nice upgrade from the Blade CP.

[dfraser]

...sort of the continuation of my last video.



This thing is going to be FUN.

[Caleb White]

Yikes! In the house, lol. So, um you realize you are going to have to carefully sport fly at 2000-2400 rpm for 2.5-3.5 min on that pack setup, don't you? If you insist on using them, you might consider 12T pinion...or just a minimum of 2200mAh packs!

Actually... 15C YOU WILL PUFF these packs perhaps with any hovering at all using that scorpion. Hopefully you have other packs on the way and those were just for testing.

[dfraser]

Originally Posted by MrRPM

Yikes! In the house, lol. So, um you realize you are going to have to carefully sport fly at 2000-2400 rpm for 2.5-3.5 min on that pack setup, don't you? If you insist on using them, you might consider 12T pinion...or just a minimum of 2200mAh

Oh, I totally don't intend on taking off using those packs. I was just looking at blade tracking and making sure everything was working alright. I have a hyperion 35c 2600 now for actual flying. And that was the last time the heli will run in the house.

Those are the packs from my Blade CP setup, but I totally HAD to try spinning up the Protos!

On another note, I realized I had the gyro gain set to 100% in, which accounts for a lot of the vibration in that video.

[dfraser]

Here's a video showing the maiden of my new Protos and showing the difference before and after the static mod.

This machine is amazingly smooth and quiet.

[African tonic]

Hi guys! i have flown my protos today and crash it after an esc failure.
Don't now if it is the thermal cut out or the timing that i have change from mid to low on my crappy esc

[ame]http://www.youtube.com/watch?v=StaV0Auf8XU[/ame]

[African tonic]

canceled

[iAdam]

Which ESC you using Tonic? Been enjoying your videos.

[African tonic]

Hi Iadamz the esc was the one that came with the stock sjm 430,i used a programing card
From hobby city on it and it worked,maybe it is the same as hobby wing and turnigy.

[Mrktplayer]

Originally Posted by African tonic

Hi Iadamz the esc was the one that came with the stock sjm 430,i used a programing card
From hobby city on it and it worked,maybe it is the same as hobby wing and turnigy.

Nice flight.

Tough to save it from where you were.

[African tonic]

Thanks Mrktplayer i really like your flights too .I tried to flip it but I was to low.But i only broke the verticale tail fin the feathering shaft and a pitch mixer.