 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| Align 3G FBL System Align 3G FBL Flybarless System Software and Hardware Support |
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
12-02-2012, 11:27 AM
|
#1 (permalink) |
|
Registered Users
Join Date: Jul 2008
|
Setting Gov.?.
I've just replaced my aging 3G for the 3GX but struggling to fine info on setting throttle & gov in tx, done the gov sync with with 3GX so just need an idea what to set the throttle norm mode & idle 1/2 & the atv for gov
__________________
TX16s Max MKll, Heli-X, OMP M2's Goosky S2's Align 470, XL380 EVO V2 Align 500EFL. Align 600 pro. |
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
12-02-2012, 11:45 AM
|
#2 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jul 2008
|
forgot to mention this is for my 600n but also got 700n to do.
__________________
TX16s Max MKll, Heli-X, OMP M2's Goosky S2's Align 470, XL380 EVO V2 Align 500EFL. Align 600 pro. |
|
|
|
|
12-02-2012, 01:18 PM
|
#3 (permalink) |
|
Registered Users
Join Date: Nov 2009
|
Use mixing, here's some examples. First is 3GX no gov in normal and two speeds using the gear switch.
 No gov setup in normal  Switched to IU  Here's one for my vbar, two mixes, the second adds to the first to get two speeds with the FMs Mix1 FM 1and2 and mix2 FM2  
__________________
Align 450Pro 3GX, 500ESP/DFC 3GX, 500L, 550 DFC MicroBeast , Velocity 50 Vbar OS55 HZ-R, D380 DFC D420, G500 Sport Microbeast, All HW V4, X5 stretch 220 Flame Emax Bullet Force V2 VTX |
|
|
|
|
12-03-2012, 03:46 AM
|
#4 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jul 2008
|
My TX is DSX9 so only need to use atv for 'gear' + is gov & - is rate mode so i assume i keep throttles curve v's in iu's as if mechanical setup then in gov mod set to around 60ish %.?.
__________________
TX16s Max MKll, Heli-X, OMP M2's Goosky S2's Align 470, XL380 EVO V2 Align 500EFL. Align 600 pro. |
|
|
|
|
12-03-2012, 05:57 PM
|
#5 (permalink) |
|
Registered Users
Join Date: Nov 2009
|
Set usable v curves just incase the gov fails and you good to go.
Linked up it will show you the head speed for your settings after inputting your gear ratio.
__________________
Align 450Pro 3GX, 500ESP/DFC 3GX, 500L, 550 DFC MicroBeast , Velocity 50 Vbar OS55 HZ-R, D380 DFC D420, G500 Sport Microbeast, All HW V4, X5 stretch 220 Flame Emax Bullet Force V2 VTX |
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
