Register Now

jwilkens · 07-03-2010, 07:35 AM

I updated my 3G unit from V1 to V2,1 today and now setup mode is giving me problems, as soon as I go into the Elev Direction setting the swash tilts totally to the right, the same thing happens going into the Ail Dir setting.

Any ideas?

michael503 · 07-03-2010, 08:14 AM

did you flash both the sensor and the control unit?

jwilkens · 07-03-2010, 08:23 AM

Yes, repeated the update about 4 times now, but still the same. Also tries the V2 uodate but also get the same.

michael503 · 07-03-2010, 08:36 AM

did you get servo wires crossed when you had it out?

jeffreydc · 07-03-2010, 02:11 PM

Why dont you try updating to version 2.0 and see if it still happens. I had problems with 2.1 myself and went back to 2.0. Version 2.0 file can be found in the align folder where the program installed.

HiroboFreak · 07-04-2010, 12:13 AM

Quote:

Originally Posted by jwilkens

I updated my 3G unit from V1 to V2,1 today and now setup mode is giving me problems, as soon as I go into the Elev Direction setting the swash tilts totally to the right, the same thing happens going into the Ail Dir setting.

Any ideas?

This happens when it hasn't entered setup mode correctly.

Ensure the status LED is solid green once you enter setup mode.

jwilkens · 07-04-2010, 03:13 AM

Tried just about everything. It also does not initialize at all. Tried my other 3G Unit sensor and then it works, seemed like the 3g Sensor is now faulty after the update.

HiroboFreak · 07-04-2010, 04:11 AM

Was the sensor & control unit updated independently?
You can't have them both connected at the same time while updating.

jwilkens · 07-04-2010, 07:05 AM

Jip, did them exactly as per the instruction. Updated both my FBL systems yesterday morning, the first unit was V2 updated to V2.1 with no problems, the second was V1 updated to V2.1 but does not work since the update.

jwilkens · 07-05-2010, 07:31 AM

I looked around, but could not find the 3G electronics for sale seperately.

Does anyone know whether the electronics are avalable seperately or if Align is planning on selling these seperately?

I don't want to go and buy a whole 3G system, just need the sensor....

michael503 · 07-05-2010, 07:50 AM

Ebay? Check the classified sections here and on other sites too.
You location may be an issue since some peeps won't ship overseas

07-03-2010, 07:35 AM	#1 (permalink)
jwilkens Registered Users Join Date: Jun 2008	Need help Please!! I updated my 3G unit from V1 to V2,1 today and now setup mode is giving me problems, as soon as I go into the Elev Direction setting the swash tilts totally to the right, the same thing happens going into the Ail Dir setting. Any ideas? __________________ Jan Lock outs between the brain and thumb occurs more regularly than those of the RX & TX

07-03-2010, 08:14 AM	#2 (permalink)
michael503 Registered Users My HF Map location Join Date: Mar 2007	did you flash both the sensor and the control unit? __________________ -Michael

07-03-2010, 08:23 AM	#3 (permalink)
jwilkens Registered Users Thread Starter Join Date: Jun 2008	Yes, repeated the update about 4 times now, but still the same. Also tries the V2 uodate but also get the same. __________________ Jan Lock outs between the brain and thumb occurs more regularly than those of the RX & TX

07-03-2010, 08:36 AM	#4 (permalink)
michael503 Registered Users My HF Map location Join Date: Mar 2007	did you get servo wires crossed when you had it out? __________________ -Michael

07-04-2010, 03:13 AM	#7 (permalink)
jwilkens Registered Users Thread Starter Join Date: Jun 2008	Tried just about everything. It also does not initialize at all. Tried my other 3G Unit sensor and then it works, seemed like the 3g Sensor is now faulty after the update. __________________ Jan Lock outs between the brain and thumb occurs more regularly than those of the RX & TX

07-03-2010, 02:11 PM	#5 (permalink)
jeffreydc Registered Users Join Date: Feb 2007	Why dont you try updating to version 2.0 and see if it still happens. I had problems with 2.1 myself and went back to 2.0. Version 2.0 file can be found in the align folder where the program installed.

07-04-2010, 04:11 AM	#8 (permalink)
HiroboFreak Registered Users My HF Map location Join Date: Sep 2005	Was the sensor & control unit updated independently? You can't have them both connected at the same time while updating. __________________ T-rex 700n VBar 5.3 Pro \| T-rex 700e V3 VBar 5.3 Pro \| JR DSX9 Limited Team RCBits \| Team Lynx

07-04-2010, 07:05 AM	#9 (permalink)
jwilkens Registered Users Thread Starter Join Date: Jun 2008	Jip, did them exactly as per the instruction. Updated both my FBL systems yesterday morning, the first unit was V2 updated to V2.1 with no problems, the second was V1 updated to V2.1 but does not work since the update. __________________ Jan Lock outs between the brain and thumb occurs more regularly than those of the RX & TX

07-05-2010, 07:31 AM	#10 (permalink)
jwilkens Registered Users Thread Starter Join Date: Jun 2008	I looked around, but could not find the 3G electronics for sale seperately. Does anyone know whether the electronics are avalable seperately or if Align is planning on selling these seperately? I don't want to go and buy a whole 3G system, just need the sensor.... __________________ Jan Lock outs between the brain and thumb occurs more regularly than those of the RX & TX

07-05-2010, 07:50 AM	#11 (permalink)
michael503 Registered Users My HF Map location Join Date: Mar 2007	Ebay? Check the classified sections here and on other sites too. You location may be an issue since some peeps won't ship overseas __________________ -Michael

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in