START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Mikado Logo 700 Xxtreme Mikado Logo 700 Xxtreme Helicopters Discussion |
|
LinkBack | Thread Tools | Display Modes |
10-22-2015, 06:20 PM | #21 (permalink) |
Registered Users
Join Date: Jan 2007
|
So just the inner diameter is smaller?
From the product pictures it seems the 800 shaft is the same length but the hole for the locking pin is higher, which means the shaft would sit lower down in a 700 airframe. I'm guessing there is a little bit sticking out below the bottom bearing.
__________________
Oxy2 210 | Oxy3 285 | Oxy4 380 | Logo 480XX | 600SX | 650SX | 690SX | 700 | 700XX | VControl |
Sponsored Links | |||
Advertisement |
|
10-23-2015, 12:17 AM | #22 (permalink) |
Registered Users
Thread Starter
Join Date: May 2006
|
The 800 shaft does have a little bit poking out the bottom bearing.
Flush pic is the bone stock 700 second pic is the 700 with 800 thick walled shaft If I recall right the shafts are identical in length but the drilling is different. Martin
__________________
Logo XXtreme 800 8917 / 256HV VBC Logo XXtreme 700 on 14s 8917 / 256HV VBC NEO Logo XXtreme 770 14s 8917/9188 VBC Logo 600 8917/ 9188 4035-500 VBC NEO |
Thread Tools | |
Display Modes | |
|
|