KBDD EE orange main blades

[Aryemis]

So I just got these blades in 325mm for my mini prôtos, they look awesome, finish is great, and they were balanced out of the box.
Visibility should be great, especially since the colors on the top & bottom of the blade are different.
I'll be flying them this afternoon, I'm not sure if i'll notice any difference from my MSH blades though even though the KBDD are a bit wider, as I'm not really a good pilot.

They do have one annoying point though, they don't fit in stock blade holder, because they are too wide in the blade grips... I'm gonna have to make a blade holder myself.

The pics don't do the colors justice at all, they really are neon orange, brighter orange than the lynx tail fin.
Don't mind my crappy canopy, it has seen two crashes...

[CrashAddict]

How much do they weigh?

[Aryemis]

Originally Posted by CrashAddict

How much do they weigh?

After flying them, they are quite a bit slower on the cyclic than the stock MSH, so I guess they are a bit heavier, can't measure it though, I don't have a small scale at home.

[dl5973]

I hope their better than the kbdd tail blades

Tail blades give vibration issues

[baui2000]

Aryemis, they seem to be wider chord than any of the other 325s I have flown. Could you please post some dimensions here?

I have had only a good experience with KBDD tails, though they were 95mm ones. They work great for smooth aerobatics. Not so much in harder flight conditions where they tend to flex more than carbon tails.

[Aryemis]

Originally Posted by baui2000

Aryemis, they seem to be wider chord than any of the other 325s I have flown. Could you please post some dimensions here?

I have had only a good experience with KBDD tails, though they were 95mm ones. They work great for smooth aerobatics. Not so much in harder flight conditions where they tend to flex more than carbon tails.

Well they are the exact same length as my MSH blades, 325mm in length.
They are a bit wider, but only on the leading edge, 36mm.
I don't have the means to measure their weight though.

[baui2000]

Thanks, man

So they are a bit wider than Radix 350s (35.5mm) and 3mm wider than both SAB and Edge 350 blades that come in close to 33mm. I should get myself a set to try.