Show Off your Gaui X2/255

[fusionsx00]

i have my larger 30 amp under the frame

You can see the side of it, its yellow

[fusionsx00]

I never see edek in here

Well once in a long while, he must be out flying and just gettting better and better

He is a really good pilot, the video of the 255 is a evil heli has some sick flying in it

[djelom]

I have the motor in front and the esc inside the back frame, against the metal mount. SO it keeps really cool. temp is 35C 38C. ironically now the hot point now is the rx at +-42C. all the servos are bellow 30C.

[Thunder Fighter]

I have heaps of pictures of mine here in my build thread.

Right now it has the SK720 in it and the ESC under the mainframe, motor at the back. I am going to reconfigure it now back to the MicroBeast as I have pulled the SK out for my Mini Protos Stretch I am building.

I plan on putting the motor up front, MB on the side at the back and then see if the ESC goes up front, under the frame or on the side to get the balance right.

//Dennis.

[pas2knut]

Here's mine.

[Thunder Fighter]

knut, where do you have your ESC to get that balanced? Your layout looks like what I am planning for mine.

//Dennis.

[nexgen]

nice birds fellas, duly Stuck

[pas2knut]

Originally Posted by Thunder Fighter

knut, where do you have your ESC to get that balanced? Your layout looks like what I am planning for mine.

//Dennis.

I have it on the underside between the skids. Although, I'm a little tail heavy. I may bring the BeastX to the front part of the frame or move the motor forward. In the current set up I can still hands free hover for about five seconds.

[zeeflyboy]

Beautiful canopy pas... Is that a custom job?

[pas2knut]

Originally Posted by zeeflyboy

Beautiful canopy pas... Is that a custom job?

No, it's made by Gaui.

H255 FRP Painted Canopy(C Type)

Go to the second page of parts.

[zeeflyboy]

Cheers - It's certainly a looker!

[fusionsx00]

Just a update of my heli,
its been flying grrreeeaatt, like frosted flakes

[SMJT]

Got some new parts Trex 250 landing skids and Trex 450 tail support that I shortened.

[fusionsx00]

the skids look good on the x2, low profile.

[zeeflyboy]

I think they look better than stock for sure, in my opinion... I was just thinking to myself that white gear would look good!

[fusionsx00]

If you guys can see on my pic above, I made skid reinforcements

Little aluminum tabs that go on top of the cf skid arm, this is where they break

I painted them black, and there hard to see.

But I have had zero skid breaks since then. And I have had alot of ruff landings

[fusionsx00]

Spooling up

My daily flights are back!

[pinguin]

Here is mine. All stock, except for the landing skid. When I receive the package, the skid broke into some pieces. So I use 250 skid.

[SMJT]

That is cool its like a helicopter version of a low rider

[fusionsx00]

the cool thing about flybars is you can run the insane head speeds
no problem.

Im hoping by christmas we will have a fbl unit that can do that.
the vibes kill the sensors in the units available right now.