Register Now

Larry227 · 11-28-2012, 10:27 PM

I'll find out this weekend for sure unless it's pouring rain which is very likely. Might be able to catch a break in between showers though.

I did get a minute tonight to check the volts/rpm screen and the rpm light does toggle when I spin the head backwards so that's a good sign.

TBur · 11-29-2012, 09:02 AM

Quote:

Originally Posted by Knuckledragger

My money is on the lack of blades being the issue. I couldn't get the governor to work on my 6HV with the HW ESC without blades. On my E7, it's worked sometimes and not others. Both of them have always worked correctly with the blades, however.

Same here - can't test this on the bench w/o blades

Jeff_Barrett · 11-29-2012, 11:17 AM

My governor issues were an incompatibility between the soft start on my ESC and the SK720 governor.

soko · 11-29-2012, 12:26 PM

bdw: Let us know your ESC!

Jeff_Barrett · 11-29-2012, 01:20 PM

Quote:

Originally Posted by soko

bdw: Let us know your ESC!

Hyperion Atlas 130A Opto

Larry227 · 12-21-2012, 10:44 PM

Just a quick update on my governor issue, or what I thought was an issue.
I still haven't maidened this thing since I put it on. Work, weather, etc has been getting in the way.
My wife gave me an early Christmas present which is a DX8 so I went through and did a fresh setup with DSMX sats. Afterwards I decided to try the governor on the bench again and again it didn't work without any blades. So what I did was change my Norm TC from 00-25-40-40-40- to 00-37-40-40-40 and I put the tail blades on. Now it works as expected even without main blades.

Not sure if it was changing the TC or adding the tail blades that did it but don't really care. Main blades are now installed and it's ready to go. Taking it to work tomorrow and going to at least do a maiden hover at lunch unless it's pouring rain. No room to cut loose and fly but plenty of room to at least hover it around and do some pitch pumps. I will also get my buddy at work to tach it for me. Will report back on how it goes.

Slyster · 12-21-2012, 11:37 PM

Good luck on the maiden!

Jeff_Barrett · 12-22-2012, 12:29 AM

Let us know how she goes, Larry!

georgi UK · 12-22-2012, 12:30 PM

=] here we go Larry!!, best.

Larry227 · 12-22-2012, 06:44 PM

Ok I finally got to fly it! Granted it was basically just hovering with a few flips and pitch pumps but I was in the parking lot at work and there wasn't much room.

The survey says.........I like it!

Keep in mind I haven't flown this 6HV since the end of August and since October i haven't flown anything but the sim so needless to say my heart rate was up. Sure felt good though. It was all uneventful as expected. Couple of times I had some good sustained hands off hover and then it would all of a sudden get a good drift to the right/rear. Not worried about that yet.

The governor worked great though I suppose I need to lower my gov gain. I set it to 35 last night and it worked well today in Norm and IU1 (1800 - 1900) but in IU2 (2000) it started chattering and getting a little tail shake. At first I thought it was a vibe until I remembered it could be the gov gain. So I'll lower it to like 25 the next time I get out and try it.
Tail held great. Piros were nice with nice stops and didn't get any movement during pitch pumps. Granted like I said, my heart was pumping pretty good so once I get back in the groove I'll be better equiped to notice the more subtle things. Plus this was my first flight with the new DX8 so that felt different too.

Only had two small issues. First was on spool-up I got a bad wobble until it ramped up. I know this has been a Compass issue for some but it's never happened to me. But this is the first time I've ever spooled up on concrete so that may have been it too.

Other issue was my fault. Last night when going over final checks I set my TH pitch curve to 00-50-50-50-100 so I would be sure I was at midstick when checking zero pitch. When I landed my first flight I hovered about 5ft off the ground and hit TH to do my mini-auto. Guess you can imagine how that went. I'm just glad I wasn't any lower when it went from hovering pitch to 0* pitch. Somehow I pulled off the landing without damaging anything. If you're ever bored I suggest you give it a try. It certainly makes the adrenalin flow.

So all in all I'm thrilled. Looks like all I need now is a few fine tuning flights and it will be awesome. Can't wait to be able to get it to a field where I can let it rip.

Slyster · 12-22-2012, 06:47 PM

georgi UK · 12-23-2012, 08:33 AM

Quote:

Originally Posted by Larry227

The survey says.........I like it! So all in all I'm thrilled. Looks like all I need now is a few fine tuning flights and it will be awesome. Can't wait to be able to get it to a field where I can let it rip.

=] Bravo!

Rodney Kirstine · 12-23-2012, 08:46 AM

Great! Really glad you have it back in the air, Larry!

soko · 12-23-2012, 07:46 PM

frypan · 12-24-2012, 10:01 PM

Always good to see a happy ending.

frypan · 01-07-2013, 04:10 PM

I AM having the SAME issue, I take off.
and it stays at a LOW headspeed doesnt switch headpseeds at all.
Thought it was blades being on or what ever thats not the issue here.
I am having an issue please HELP!!!!!!!!!!!!!

11-28-2012, 10:27 PM	#21 (permalink)
Larry227 Registered Users Thread Starter My HF Map location Join Date: Jul 2008	I'll find out this weekend for sure unless it's pouring rain which is very likely. Might be able to catch a break in between showers though. I did get a minute tonight to check the volts/rpm screen and the rpm light does toggle when I spin the head backwards so that's a good sign. __________________ Trex 700 Pro DFC - Compass 6HV - Vcontrol - Neo #nodroneshere - 104

11-29-2012, 12:26 PM	#24 (permalink)
soko Registered Users My HF Map location Join Date: Nov 2010	bdw: Let us know your ESC! __________________ The future of setup... now! Soko Heli Toolbox app for a next generation setup experience. ONE tool for ALL setups of ALL sizes and ALL brands of helis www.soko-heli-tools.com

12-21-2012, 10:44 PM	#26 (permalink)
Larry227 Registered Users Thread Starter My HF Map location Join Date: Jul 2008	Just a quick update on my governor issue, or what I thought was an issue. I still haven't maidened this thing since I put it on. Work, weather, etc has been getting in the way. My wife gave me an early Christmas present which is a DX8 so I went through and did a fresh setup with DSMX sats. Afterwards I decided to try the governor on the bench again and again it didn't work without any blades. So what I did was change my Norm TC from 00-25-40-40-40- to 00-37-40-40-40 and I put the tail blades on. Now it works as expected even without main blades. Not sure if it was changing the TC or adding the tail blades that did it but don't really care. Main blades are now installed and it's ready to go. Taking it to work tomorrow and going to at least do a maiden hover at lunch unless it's pouring rain. No room to cut loose and fly but plenty of room to at least hover it around and do some pitch pumps. I will also get my buddy at work to tach it for me. Will report back on how it goes. __________________ Trex 700 Pro DFC - Compass 6HV - Vcontrol - Neo #nodroneshere - 104

12-21-2012, 11:37 PM	#27 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	Good luck on the maiden! __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

12-22-2012, 12:30 PM	#29 (permalink)
georgi UK Join Date: Mar 2007	=] here we go Larry!!, best. __________________

11-29-2012, 11:17 AM	#23 (permalink)
Jeff_Barrett Registered Users Join Date: Aug 2010	My governor issues were an incompatibility between the soft start on my ESC and the SK720 governor.

12-22-2012, 12:29 AM	#28 (permalink)
Jeff_Barrett Registered Users Join Date: Aug 2010	Let us know how she goes, Larry!

12-22-2012, 06:44 PM	#30 (permalink)
Larry227 Registered Users Thread Starter My HF Map location Join Date: Jul 2008	Ok I finally got to fly it! Granted it was basically just hovering with a few flips and pitch pumps but I was in the parking lot at work and there wasn't much room. The survey says.........I like it! Keep in mind I haven't flown this 6HV since the end of August and since October i haven't flown anything but the sim so needless to say my heart rate was up. Sure felt good though. It was all uneventful as expected. Couple of times I had some good sustained hands off hover and then it would all of a sudden get a good drift to the right/rear. Not worried about that yet. The governor worked great though I suppose I need to lower my gov gain. I set it to 35 last night and it worked well today in Norm and IU1 (1800 - 1900) but in IU2 (2000) it started chattering and getting a little tail shake. At first I thought it was a vibe until I remembered it could be the gov gain. So I'll lower it to like 25 the next time I get out and try it. Tail held great. Piros were nice with nice stops and didn't get any movement during pitch pumps. Granted like I said, my heart was pumping pretty good so once I get back in the groove I'll be better equiped to notice the more subtle things. Plus this was my first flight with the new DX8 so that felt different too. Only had two small issues. First was on spool-up I got a bad wobble until it ramped up. I know this has been a Compass issue for some but it's never happened to me. But this is the first time I've ever spooled up on concrete so that may have been it too. Other issue was my fault. Last night when going over final checks I set my TH pitch curve to 00-50-50-50-100 so I would be sure I was at midstick when checking zero pitch. When I landed my first flight I hovered about 5ft off the ground and hit TH to do my mini-auto. Guess you can imagine how that went. I'm just glad I wasn't any lower when it went from hovering pitch to 0* pitch. Somehow I pulled off the landing without damaging anything. If you're ever bored I suggest you give it a try. It certainly makes the adrenalin flow. So all in all I'm thrilled. Looks like all I need now is a few fine tuning flights and it will be awesome. Can't wait to be able to get it to a field where I can let it rip. __________________ Trex 700 Pro DFC - Compass 6HV - Vcontrol - Neo #nodroneshere - 104

12-22-2012, 06:47 PM	#31 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	__________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

12-23-2012, 08:46 AM	#33 (permalink)
Rodney Kirstine Registered Users Join Date: Mar 2012	Great! Really glad you have it back in the air, Larry! __________________ Team Synergy Field Rep, Rail Blades

12-23-2012, 07:46 PM	#34 (permalink)
soko Registered Users My HF Map location Join Date: Nov 2010	__________________ The future of setup... now! Soko Heli Toolbox app for a next generation setup experience. ONE tool for ALL setups of ALL sizes and ALL brands of helis www.soko-heli-tools.com

12-24-2012, 10:01 PM	#35 (permalink)
frypan Registered Users ):> Join Date: Sep 2008	Always good to see a happy ending. __________________ Banging them sticks. -Dan Duzinski

01-07-2013, 04:10 PM	#36 (permalink)
frypan Registered Users ):> Join Date: Sep 2008	I AM having the SAME issue, I take off. and it stays at a LOW headspeed doesnt switch headpseeds at all. Thought it was blades being on or what ever thats not the issue here. I am having an issue please HELP!!!!!!!!!!!!! __________________ Banging them sticks. -Dan Duzinski

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in