Your GAUI X7 Setup

[akamullen]

Originally Posted by Magooch

The kit is still being shipped (thanks Dave!)

Your gonna love it. Hands down best 90E out there IMO.

[Magooch]

That's great news, I have been following the X7 threads for quit some time now and have been anticipating it's release and review. This all started when I flew a buddy's 700e a few months ago and decided I had to have a big bird. The X7 is well out of my range of flying at the moment but I'm sure I will grow into it. I knew Guai would not dissapoint, I have had the chance to see a couple of their models and flew a x5 a few times. I am very excited

[Chris Sexton]

Originally Posted by akamullen

Your gonna love it. Hands down best 90E out there IMO.

+1. Truly a blast to fly!


Sent from my iPhone using Tapatalk

[irishmatt18]

Here is the plan.
X7
Flight Style: Sport/Mild 3D
FBL System: Full Vbar
Motor: Scorpion HKIII 4035-500 (taken from my fusion)
Pinion: 10
Target Headspeed(s): 1950 2050 2150
ESC: CC ICE2 120HV
Governor: CC
BEC: CC BEC PROv3
RX Pack: none
Cyclic Servos: Align
Tail Servo: Align
Main Blades: Edge 693 or SAB (just for the red color)
Tail Blades: Edge 105 or SAB
Lipos: Gensace 5300

[_Dekker]

Flight Style: 3D
FBL System: Mikado V-bar 5.2pro
Motor: Scorpion HK-4225 PowerDekker - 540KV
Pinion: 10T
Target Headspeed(s): 1900 - 2050 - 2200
ESC: YGE 120 HV
Governor: V-Bar Governor
BEC: Western Robotics Hercules
RX Pack: None
Cyclic Servos: Futaba BLS 255HV @ 8.4v
Tail Servo: Futaba BLS 256HV @ 8.4v
Main Blades: Radix Standard 710mm
Tail Blades: Edge 105mm
Lipos: Gens Ace 5300 30C

[torana74]

Flight Style: Hack
FBL System: Mikado mini V-bar 5.2pro
Motor: Scorpion 4525 520kv
Pinion: 11T
Target Headspeed(s): 2050, 2150,2300
ESC: Scorpion V5 130amp
Governor: V-Bar Governor
BEC: Scorpion esc built in
RX Pack: None
Cyclic Servos: Futaba BLS 255HV @ 7.4v
Tail Servo: Futaba BLS 256HV @ 7.4v
Main Blades: Edge 693 se
Tail Blades: Edge 105mm
Lipos: Mix of Hyperion 45c 4200 and kong power 65c 5000




result of all this =
grinning like a teenager with a copy of playboy


Vas

[Al Austria]

X7
Flight Style: 3D
FBL System: V-Bar 5.2
Motor: Scorpion 4525-520 LE
Pinion: 10
Target Headspeed(s): 2100
ESC: Hobbywing 120HV
Governor: V-Bar integrated
BEC: WR Hercules Super BEC
RX Pack: None
Cyclic Servos: JR 8917HV's @ 8.4V
Tail Servo: Futaba BLS256HV @ 8.4V
Main Blades: experimenting
Tail Blades: experimenting
Lipos: Hyperion EX 5000 45C

[rcbirk21]

the hobby shop i work at has a x7 sitting on the shelf and its calling my name. would a hacker turnado a50 be enough motor for this ship? i really do not like scorpion motors and am looking for a somewhat light weight alternative

[ragtop01]

it looks like it should. im running a 700mx and very happy with it aswell.

[Chris Sexton]

Originally Posted by rcbirk21

the hobby shop i work at has a x7 sitting on the shelf and its calling my name. would a hacker turnado a50 be enough motor for this ship? i really do not like scorpion motors and am looking for a somewhat light weight alternative

Hey Eric make sure Keith treats you right on that kit

I am running one of those hacker a50-12l motors on my e7. Loads of torque and very smooth. Should do nicely in an x7.


Sent from my iPhone using Tapatalk

[rcbirk21]

Originally Posted by cdsexton

Hey Eric make sure Keith treats you right on that kit

I am running one of those hacker a50-12l motors on my e7. Loads of torque and very smooth. Should do nicely in an x7.


Sent from my iPhone using Tapatalk

he has no choice since i get my employee discount

[vr360]

X7
Flight Style: Hard 3d/smack
FBL System: Mikado VBar 5.2 pro Blue line full size
Motor: Scorpion HKIII-4035-530kv(gaui extended shaft)
Pinion: 11T
Target Headspeed(s): 2000, 2175,2300
ESC: Scorpion Commander V 130AMP SBEC
Governor: Vbar gov
BEC: Scorpion internal SBEC with Lifepo buffer pack
RX Pack: n/a
Cyclic Servos: Outrage 9180 @ 7.4v
Tail Servo:Outrage 9188 @ 7.4v
Main Blades: Edge 693SE
Tail Blades: Edge 105
Lipos: TP 65c 5000mah x2

[IndividualWon]

X7:

Flight Style: Everything except FAI
FBL System: Mini V Bar 5.2
Motor: TBA
Pinion: TBA
Target Headspeed(s): 2200
ESC: Scorpion V 130HV
Governor: V Bar
BEC: TBA
RX Pack: TBA
Cyclic Servos: TBA
Tail Servo: Futaba HV BLS256
Main Blades: TBA
Tail Blades: TBA
Lipos: TBA

[Siger]

X7
Flight Style: Sport
FBL System: Beastx (pending purchase)
Motor: Gaui GUEC 350S (scorpion 4035-500 longshaft 110mm)
Pinion: stock
Target Headspeed(s): 1900-2000-2100
ESC: CC Ice2 120HV
Governor: Yes
BEC: Gryphon Quasar
RX : Futaba R6203SB
RX Pack: Kypom 450mah
Cyclic Servos: Savöx sb 2271sg
Tail Servo: Savöx sb2272mg
Main Blades: Edge 693 fbl
Tail Blades: Edge 105
Lipos : Gens ice 5300 or Kypom 5000 or Optipower 5000mah or Nanotech 5000 (pending purchase).

[Sharpedge]

Siger, where did you get the Gaui GUEC 350S motor, they are out of stock like everywhere!

[xfactor6]

Originally Posted by Sharpedge

Siger, where did you get the Gaui GUEC 350S motor, they are out of stock like everywhere!

you can get them from dronevision

[xfactor6]

X7:

Flight Style: Sport
FBL System: AR7200bx
Motor: Gaui 350s
Pinion: 10
Target Headspeed(s): 1800,1850,1900
ESC: CC 120HV
Governor: CC 120HV Gov
BEC: Gryphon quasar
RX Pack: NONE
Cyclic Servos: 1267SG savox
Tail Servo: 2272 Savox
Main Blades: 700 SAB
Tail Blades: 106 SAB
Lipos: Turnigy 30C 5000MAH

[Siger]

Hy,
Yes, I bought the engine by Dornevision :
http://www.dronesvision.com/gaui-217...s-motor-500kv/

Good seller, no problems.

[Sharpedge]

Originally Posted by Siger

Hy,
Yes, I bought the engine by Dornevision :
http://www.dronesvision.com/gaui-217...s-motor-500kv/

Good seller, no problems.

Thanks for the info, can you confirm that the motor is shipped with the correct lenght shaft for use in the 3rd bearing block on the X7?

[xfactor6]

Originally Posted by Sharpedge

Thanks for the info, can you confirm that the motor is shipped with the correct lenght shaft for use in the 3rd bearing block on the X7?

confirmed 4 bolts right in and length of the shaft is perfect. Was specifically made for the X7. installed and maidened last week