Register Now

Rod Hancock · 07-13-2010, 10:46 AM

wondering what would be a good governor to use with 70sz-h on 60 raptor with dx7 tx and ar 7000 rx?

vernon7026 · 07-13-2010, 02:00 PM

I use the Thunder tiger on my raptor 90 and it works fine !

Rod Hancock · 07-13-2010, 02:50 PM

will it work with the spectrum ar 7000 reciever?

vernon7026 · 07-15-2010, 11:39 AM

Yes of course it will

Mine works, lol..

Rod Hancock · 07-17-2010, 12:20 PM

There is noboby around where i live that fly helicopters or planes so im kinda on my own. ?was it very hard to install as far as the magnets and brackets

vernon7026 · 07-18-2010, 12:15 PM

No, was quite easy, especially as i have never set up a governor before, make sure you install the magnets in the correct way IE: one with + up and other with + down.

then just do what the instructions say, and you should be ok ..

Rod Hancock · 07-18-2010, 09:32 PM

thanks alot for the info!!!!!!!!!!!

vernon7026 · 07-19-2010, 10:45 AM

anytime pal !

tS8103 · 07-20-2010, 07:54 AM

I am using the revmax on both of my 90 with great success. I also have heard that the multigov works well.
Tone

jhonny700 · 05-30-2012, 11:22 AM

hola
porfavor me podrian decir
donde conseguir los videos de bob
para configurar este governador.
gracias

07-13-2010, 10:46 AM	#1 (permalink)
Rod Hancock Registered Users Join Date: Jun 2010	help with a governor!!!!! wondering what would be a good governor to use with 70sz-h on 60 raptor with dx7 tx and ar 7000 rx?

07-19-2010, 10:45 AM	#8 (permalink)
vernon7026 Registered Users Join Date: May 2008	anytime pal ! __________________ T-REX 600 LE OS 55 Outrage pipe, S9451 x3 S9251 Gy601 T-REX 600 SUPER PRO OS 50 hatori GY611 ds620 Ds610 x3 T-REX 450 SE v2 Hitec Digital cyclic, s9257 and Align Gyro

07-20-2010, 07:54 AM	#9 (permalink)
tS8103 Registered Users Join Date: Sep 2005	I am using the revmax on both of my 90 with great success. I also have heard that the multigov works well. Tone __________________ Team Outrage YS Engines Team Switchglo Team Lynx

05-30-2012, 11:22 AM	#10 (permalink)
jhonny700 Registered Users Join Date: May 2012	atg v3 governador hola porfavor me podrian decir donde conseguir los videos de bob para configurar este governador. gracias

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-13-2010, 02:00 PM	#2 (permalink)
vernon7026 Registered Users Join Date: May 2008	I use the Thunder tiger on my raptor 90 and it works fine !

07-13-2010, 02:50 PM	#3 (permalink)
Rod Hancock Registered Users Thread Starter Join Date: Jun 2010	will it work with the spectrum ar 7000 reciever?

07-15-2010, 11:39 AM	#4 (permalink)
vernon7026 Registered Users Join Date: May 2008	Yes of course it will Mine works, lol..

07-17-2010, 12:20 PM	#5 (permalink)
Rod Hancock Registered Users Thread Starter Join Date: Jun 2010	There is noboby around where i live that fly helicopters or planes so im kinda on my own. ?was it very hard to install as far as the magnets and brackets

07-18-2010, 12:15 PM	#6 (permalink)
vernon7026 Registered Users Join Date: May 2008	No, was quite easy, especially as i have never set up a governor before, make sure you install the magnets in the correct way IE: one with + up and other with + down. then just do what the instructions say, and you should be ok ..

07-18-2010, 09:32 PM	#7 (permalink)
Rod Hancock Registered Users Thread Starter Join Date: Jun 2010	thanks alot for the info!!!!!!!!!!!

Register Now

Log-in