Register Now

Blink 182 · 10-04-2010, 07:03 PM

Are the white skids going that tareq has going to be sold?
I dont like black

statton1 · 10-04-2010, 07:23 PM

orange but ill take the white ones,was gonna use @lign orange but just couldnt do it

Blink 182 · 10-04-2010, 08:55 PM

More stock options would be nice, i wouldnt like modding other heli's parts to fit another

statton1 · 10-04-2010, 09:48 PM

yep it would be cool to have options like colored tail booms,and skids etc.......

dunkonu23 · 10-05-2010, 04:59 AM

I've got the Orange Align struts on my V50... looks pretty good. Drilling was easy and I had to use a longer screw to hold the thinner Outrage skid tubes in place, but other than that, it's really nice to see them against trees when you can't really see the disk.

Scott

OUTRAGE RC · 10-05-2010, 02:19 PM

yes we should have them shipped next week to dealers.

www.outragerc.com

Blink 182 · 10-05-2010, 04:41 PM

Thanks!

silverbullet · 10-16-2010, 03:29 AM

so then where are the white landing gears???

statton1 · 10-19-2010, 03:25 PM

hd has an ETA: 11/02/2010 for the skids - very excited can't stand the black skids -want orange -got the dye sittin here waitin -

Foxden · 10-19-2010, 03:34 PM

Let me know how that works out, I've never tried to dye a set of white gear, have plenty of main and tail drive gears, both front and rear tail gears and so far they are holding up well. The new landing gear is quite a bit stronger than the original so the dye and temp shouldn't effect them going thru the process.

statton1 · 10-19-2010, 05:39 PM

i didnt think about that the black ones are pretty thick -not sure i wanna even attemp to dye them . owell

Foxden · 10-19-2010, 07:43 PM

I'm going to give it a try, I have a burner on the grill, keeps the pot at just the right temp, just drop them in for a few minutes and see how they come out.

statton1 · 10-19-2010, 10:53 PM

it couldnt hurt ,ill give it a try

devens · 10-24-2010, 08:40 AM

I usually don't like white skids....but with the white canopy scheme I am going to go for them.

If I had my choice I would want red.

D

10-04-2010, 07:03 PM	#1 (permalink)
Blink 182 Registered Users Join Date: Mar 2010	White skids? Are the white skids going that tareq has going to be sold? I dont like black __________________ (´・ω・`)

10-04-2010, 07:23 PM	#2 (permalink)
statton1 Registered Users Join Date: May 2009	or orange but ill take the white ones,was gonna use @lign orange but just couldnt do it __________________ Velocity50 - os hyper 50/gy520-ds 610 x 4 -ds650

10-04-2010, 08:55 PM	#3 (permalink)
Blink 182 Registered Users Thread Starter Join Date: Mar 2010	More stock options would be nice, i wouldnt like modding other heli's parts to fit another __________________ (´・ω・`)

10-04-2010, 09:48 PM	#4 (permalink)
statton1 Registered Users Join Date: May 2009	yep yep it would be cool to have options like colored tail booms,and skids etc....... __________________ Velocity50 - os hyper 50/gy520-ds 610 x 4 -ds650

10-05-2010, 04:59 AM	#5 (permalink)
dunkonu23 Registered Users Join Date: Jan 2009 Location: Michigan, slightly Northeast of Hell	I've got the Orange Align struts on my V50... looks pretty good. Drilling was easy and I had to use a longer screw to hold the thinner Outrage skid tubes in place, but other than that, it's really nice to see them against trees when you can't really see the disk. Scott __________________ *Spartan Vortex Inside,Team Scorpion* KBDD Team Pilot ):>

10-05-2010, 02:19 PM	#6 (permalink)
OUTRAGE RC Registered Users Join Date: Jun 2008	yes we should have them shipped next week to dealers. www.outragerc.com

10-05-2010, 04:41 PM	#7 (permalink)
Blink 182 Registered Users Thread Starter Join Date: Mar 2010	Thanks! __________________ (´・ω・`)

10-16-2010, 03:29 AM	#8 (permalink)
silverbullet Registered Users Join Date: May 2007	so then where are the white landing gears???

10-19-2010, 03:25 PM	#9 (permalink)
statton1 Registered Users Join Date: May 2009	skids hd has an ETA: 11/02/2010 for the skids - very excited can't stand the black skids -want orange -got the dye sittin here waitin - __________________ Velocity50 - os hyper 50/gy520-ds 610 x 4 -ds650

10-19-2010, 03:34 PM	#10 (permalink)
Foxden Registered Users My HF Map location Join Date: Jul 2004	Let me know how that works out, I've never tried to dye a set of white gear, have plenty of main and tail drive gears, both front and rear tail gears and so far they are holding up well. The new landing gear is quite a bit stronger than the original so the dye and temp shouldn't effect them going thru the process. __________________ *Clyde Fox* *Port Charlotte, FL.* Team Rotorworkz/Outrage

10-19-2010, 05:39 PM	#11 (permalink)
statton1 Registered Users Join Date: May 2009	hmmmm i didnt think about that the black ones are pretty thick -not sure i wanna even attemp to dye them . owell __________________ Velocity50 - os hyper 50/gy520-ds 610 x 4 -ds650

10-19-2010, 07:43 PM	#12 (permalink)
Foxden Registered Users My HF Map location Join Date: Jul 2004	I'm going to give it a try, I have a burner on the grill, keeps the pot at just the right temp, just drop them in for a few minutes and see how they come out. __________________ *Clyde Fox* *Port Charlotte, FL.* Team Rotorworkz/Outrage

10-19-2010, 10:53 PM	#13 (permalink)
statton1 Registered Users Join Date: May 2009	yeah it couldnt hurt ,ill give it a try __________________ Velocity50 - os hyper 50/gy520-ds 610 x 4 -ds650

10-24-2010, 08:40 AM	#14 (permalink)
devens Registered Users Join Date: Jun 2009	I usually don't like white skids....but with the white canopy scheme I am going to go for them. If I had my choice I would want red. D

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in