START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Titan X50E Thunder Tiger Titan X50E Helicopters |
|
LinkBack | Thread Tools | Display Modes |
08-27-2012, 09:26 AM | #1 (permalink) |
Registered Users
Join Date: Jan 2011
|
titan x50e need info
need pics of some wireing im running beastx and with it in the back my servos don't reach and is there any other place were i can put the beastx.im using all servos and ecs,motor from a trex 600 efl thanks for any info
|
Sponsored Links | |||
Advertisement |
|
08-27-2012, 10:55 AM | #2 (permalink) |
Registered Users
Join Date: Mar 2008
|
I mounted mine in the back and you will need a couple of servo extensions to reach it.
My son mounted his up front on the side of the frame and I believe he had to use a couple of servo extensions also. Here's a couple of pictures. Hope this helps you out. Charlie |
08-27-2012, 01:16 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
thank. how do you like the x50.im coming from the trex600 efl.and aare you runing 12s.and wats a good headspeed for this heli doing mild 3d.thanks again for the pics
|
08-28-2012, 04:06 PM | #5 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
i think im going to mount it on the side.and i checked out your post thanks
|
08-28-2012, 04:11 PM | #6 (permalink) |
Registered Users
Join Date: Feb 2008
|
I mounted mine right on the front tray laying flat as close to the servos as possible...works great.
|
08-28-2012, 06:38 PM | #7 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
raporz499 i was thinking the same thing.are you running a beastx?and how is the tail holding being that far from the main shaft.
|
08-28-2012, 08:18 PM | #8 (permalink) |
Registered Users
Join Date: Feb 2008
|
Solid as a rock bud! I can send you a picture if you like? I have the esc sideways in the front tray and the lipo forvthe electronics where the esc "should be"
Pm me your email address and I can send picture |
08-29-2012, 07:40 AM | #9 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
Pm sent.I'm using the Bec pro that's connects to one of my 6s lipo.I'm running the tp 3850 65c x2 i think it saves a little weight.this is the set up i was running on the trex600 efl I'll post pics when I'm done with the build.thanks to everybody that posted to help me out heli freak #1 can't wait to get it up and going.now i need to know watt its a good headspeed for doing mild 3d thanks again everybody for the help
|
Thread Tools | |
Display Modes | |
|
|