Stretching a 700 with new 800E parts?

[hakulhak]

How many gallon the clutch system will stand?

[Coolheli]

2 years - no issues so far. Started with Align 800 blades and 105 tail.
Running 770 Sab with 115 tail now.

[338federal]

Originally Posted by Coolheli

How long is your boom?
I've stretched my 700 as well but I couldn't run the 800 Align blades with 115 tails as they would touch.
It took few second of hover to see how dangerously close those two rotors were operating. Slightest flex and it would be GAME OVER.

Tailboom is 885. I fly with 813 edge blades and 115 edge on tail. Not much but they dont touch. I fly with low rpm and i want 120 or 130 tailblades. Thats why i want the 800 trekker boomkit.

If someone has tested that they fit on 700E v2. The parts be about 2200 swedish money 240€.

I have the old high FBL head not crappy DFC.

I don't know how people test if the blade hits each other. I put one main blade like lagging backwards mainblade hits tailblade with one mm. I put back my 800 sab blades. 800E parts needed.

[338federal]

I ordered the 800E tail parts. Maybe i can fly safe with edge 813 and 120 or 130 blades in tail. Ihope that all fits my 700e v2 oldie machine. 250€

[KSHeli]

Originally Posted by 338federal

Old thread but i have stretched my v2 700 with original kit from align. I have the old fbl head. I had now 813 edge and edge 115 in tail. Flies great. 1200 rpm lowest and flight time 9-12 min. But i want put longer tail blades than 115. What exactly do i need to put 800E parts on tail? Can someone put a list and i will order the parts. Main gear must be 112 because big scorpion motor is taking all the empty space.

I replaced the front landing gear on my Trex 700 with the F3C gear, remember front only and it kicks the tail up about 4cm giving more tail clearance to the ground. The F3C langing gear are about $5-6 US and this works great for me landing in the grass or hard landings.

[338federal]

I have high tail. I think i have 600e landing gear in front and 700 back. Maybe i get my 800 parts next week.

[338federal]

Now it is ready for test flight. All parts fits perfect. Now can my oldie 700E V2 swing edge 813mm with no tail strike.

[338federal]

Like i wrote before. 700E with 800E tail. Now i wonder how many cm from boom to blade in original 800E DFC?

[338federal]

Now i have tritail with 105mm edges. Seeking the sweet to the tail.