Agile 3,6

[maarset]

So I heard on a certain pod cast both of these new KDS 450's are designed around mini servos. A logo 10 running 500 mm blades had mini servos. What's going on? Am I missing something here?

I feel my warp would be way to heavy if I has to run mini servos IMO IMO

[BorgeBorge]

I listened to that episode too.

I like the Idea of running bigger servos.
Propably designed to run enough headspeed to compensate for the extra weigth

[maarset]

Originally Posted by BorgeBorge

I listened to that episode too.

I like the Idea of running bigger servos.
Propably designed to run enough headspeed to compensate for the extra weigth

True True.
I guess the majority likes a slightly heavier model with a higher HS.

[rallyant]

The Chase was designed entirely for micro servos but has been amended to take both mini and micro on the tail only. Im guessing an unintentional mistake on the pod cast, so the Agile is probably micro also.

Sent from my C6903 using Tapatalk

[Luigi_tuga]

Originally Posted by rallyant

The Chase was designed entirely for micro servos but has been amended to take both mini and micro on the tail only. Im guessing an unintentional mistake on the pod cast, so the Agile is probably micro also.

Sent from my C6903 using Tapatalk

That makes sense.
There is no need for bigger servos, 3 kg of torque per servo is plenty for 360 blades.

[maarset]

Originally Posted by rallyant

The Chase was designed entirely for micro servos but has been amended to take both mini and micro on the tail only. Im guessing an unintentional mistake on the pod cast, so the Agile is probably micro also.

Sent from my C6903 using Tapatalk

Ah cool thanks.