Register Now

StrangeRanger · 09-01-2004, 01:45 PM

I've been reading the forum and you guys have been a wealth of info. Thank you. But now I have another noob question. I've noticed in a lot of posts that you guys have been saying that the screws that come w/ the HS-55's etc. don't work...if so, what have you guys been using for screws? What size and where did you get them? Thanks,
j

WillJames · 09-01-2004, 03:37 PM

I used the ones that cam with HS 55's I am pretty sure, or else thay came with 9252's.

Hotshot Charlie · 09-01-2004, 04:10 PM

I just found a larger diameter screw in my junk box. I cut them off off length wise.

The holes in the Shogun I had were just a little too big, yours might be smaller. You will know it if the holes are too big.

09-01-2004, 01:45 PM	#1 (permalink)
StrangeRanger Registered Users Join Date: Aug 2004	Another newbie build question I've been reading the forum and you guys have been a wealth of info. Thank you. But now I have another noob question. I've noticed in a lot of posts that you guys have been saying that the screws that come w/ the HS-55's etc. don't work...if so, what have you guys been using for screws? What size and where did you get them? Thanks, j

09-01-2004, 03:37 PM	#2 (permalink)
WillJames Registered User My HF Map location Join Date: Mar 2004	I used the ones that cam with HS 55's I am pretty sure, or else thay came with 9252's. __________________ William James Crazy wife still trying to kill me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-01-2004, 04:10 PM	#3 (permalink)
Hotshot Charlie Join Date: Apr 2004	I just found a larger diameter screw in my junk box. I cut them off off length wise. The holes in the Shogun I had were just a little too big, yours might be smaller. You will know it if the holes are too big.

Register Now

Log-in