Register Now

RCnut1980 · 05-06-2012, 01:13 PM

What size blades are best for 3d on the x50b (redline .53) - 600's or 620's?

What is the performance difference between the two, and what are you guys running?

carlos · 05-06-2012, 03:06 PM

600's are easier on the motor, 620's are better for collective "pop" and autos.
I prefer 610's

KouDy · 05-06-2012, 08:03 PM

I am running stock 600mm now and have my eyes on 603mm Edge. As for 620mm sizes can they work? It looks to me that there would be interference to the tail rotor.
Performance wise bigger disk means bigger stability but also more strain to the engine as it's more mass to spin.

carlos · 05-07-2012, 01:31 AM

no interference when running 95mm tails

KouDy · 05-07-2012, 02:05 AM

Cool thanks for the info! So i can use Edge 623mm without worries.

RCnut1980 · 05-07-2012, 02:27 AM

I like the new SAB red 620 blades, but what brands do you recommend for 610's?

NitroAl · 05-07-2012, 05:03 AM

I find the 620s too floaty on the X50. So far I have tried Radix 600's, Edge 603's, GCT ultra pro extream 620's (Maveric pro wide chord) and the TT carbon blades that came with my two kits and my pick are the TT carbon blades and the Edge 603's.

carlos · 05-07-2012, 02:42 PM

610's, Rotor Tech are the pick

johnbs8 · 05-07-2012, 10:18 PM

i fly compass 615mm blades. they fly great. i got them when they were $65 now they are up to $80. glad i got em when i did.

RCnut1980 · 05-08-2012, 05:34 AM

I'm in the UK and all stockists seem to be out of Rotortech blades. Could anyone suggest a good US stockist please?

KouDy · 05-08-2012, 07:06 AM

Same for asia. Virtually noone has 600 class blades on stock. Mat Botos blades are not here at all. I will probably try Edge or something...

Adam F · 09-12-2012, 05:46 PM

Can i use radix 625 on my x50T that i converted to flybarless?

johnbs8 · 09-13-2012, 01:06 PM

Adam, ypu can use 625's. I used them for a min. I didnt like them as they were too slow on cyclic. They fly more like an airplane. I use the edge 603 fbl and they are great blades. I tried a set of the edge 603 fb and they flew awsome too. Both my x50's are FBL.

Adam F · 09-26-2012, 11:05 AM

Thanks for the advice

05-06-2012, 01:13 PM	#1 (permalink)
RCnut1980 Registered Users Join Date: Jan 2011	Blade Size What size blades are best for 3d on the x50b (redline .53) - 600's or 620's? What is the performance difference between the two, and what are you guys running?

05-06-2012, 03:06 PM	#2 (permalink)
carlos Registered Users Join Date: Jul 2004	600's are easier on the motor, 620's are better for collective "pop" and autos. I prefer 610's __________________ If it won't hover, Don't bother !

05-06-2012, 08:03 PM	#3 (permalink)
KouDy Registered Users My HF Map location Join Date: Jan 2011	I am running stock 600mm now and have my eyes on 603mm Edge. As for 620mm sizes can they work? It looks to me that there would be interference to the tail rotor. Performance wise bigger disk means bigger stability but also more strain to the engine as it's more mass to spin. __________________ shelved : Titan e325 SE flybarred \| Titan X50 flybarred torque tube Futaba 10C in mode 3

05-07-2012, 01:31 AM	#4 (permalink)
carlos Registered Users Join Date: Jul 2004	no interference when running 95mm tails __________________ If it won't hover, Don't bother !

05-07-2012, 02:05 AM	#5 (permalink)
KouDy Registered Users My HF Map location Join Date: Jan 2011	Cool thanks for the info! So i can use Edge 623mm without worries. __________________ shelved : Titan e325 SE flybarred \| Titan X50 flybarred torque tube Futaba 10C in mode 3

05-07-2012, 02:27 AM	#6 (permalink)
RCnut1980 Registered Users Thread Starter Join Date: Jan 2011	I like the new SAB red 620 blades, but what brands do you recommend for 610's?

05-07-2012, 05:03 AM	#7 (permalink)
NitroAl Registered Users My HF Map location Join Date: Jun 2008	I find the 620s too floaty on the X50. So far I have tried Radix 600's, Edge 603's, GCT ultra pro extream 620's (Maveric pro wide chord) and the TT carbon blades that came with my two kits and my pick are the TT carbon blades and the Edge 603's. __________________ CustomHeliParts/KDE TRex 700N ThunderTiger X50 FBL Ely.Q Vision 90 Ely.Q Vision 50

05-07-2012, 02:42 PM	#8 (permalink)
carlos Registered Users Join Date: Jul 2004	610's, Rotor Tech are the pick __________________ If it won't hover, Don't bother !

05-07-2012, 10:18 PM	#9 (permalink)
johnbs8 Registered Users My HF Map location Join Date: Mar 2008	i fly compass 615mm blades. they fly great. i got them when they were $65 now they are up to $80. glad i got em when i did. __________________ Mikado 550sx, TT X50N, Align 470L

05-08-2012, 05:34 AM	#10 (permalink)
RCnut1980 Registered Users Thread Starter Join Date: Jan 2011	I'm in the UK and all stockists seem to be out of Rotortech blades. Could anyone suggest a good US stockist please?

05-08-2012, 07:06 AM	#11 (permalink)
KouDy Registered Users My HF Map location Join Date: Jan 2011	Same for asia. Virtually noone has 600 class blades on stock. Mat Botos blades are not here at all. I will probably try Edge or something... __________________ shelved : Titan e325 SE flybarred \| Titan X50 flybarred torque tube Futaba 10C in mode 3

09-12-2012, 05:46 PM	#12 (permalink)
Adam F Registered Users Join Date: Jul 2008	Can i use radix 625 on my x50T that i converted to flybarless?

09-13-2012, 01:06 PM	#13 (permalink)
johnbs8 Registered Users My HF Map location Join Date: Mar 2008	Adam, ypu can use 625's. I used them for a min. I didnt like them as they were too slow on cyclic. They fly more like an airplane. I use the edge 603 fbl and they are great blades. I tried a set of the edge 603 fb and they flew awsome too. Both my x50's are FBL. __________________ Mikado 550sx, TT X50N, Align 470L

09-26-2012, 11:05 AM	#14 (permalink)
Adam F Registered Users Join Date: Jul 2008	Thanks for the advice

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in