Register Now

bmclaurin · 01-21-2013, 07:49 PM

I've done this successfully a few times, but for whatever reason I can't get the connection to work now with my HJ. I'm using HJ120 (v11). I removed both the master and slave cables from the HJ and then connected the master port from the HJ to the 'ESC' port on the Progcard II. I then powered the HJ with my normal flight pack. When I do this, all the lights on the Progcard II momentarily light up for about 1 second and then turn off. What am I doing wrong?

Vinger · 01-21-2013, 10:37 PM

Strange as that is the correct procedure, just make sure of the polarity of the cable at both ProgCard and HJ side.

bmclaurin · 02-08-2013, 06:08 PM

Bumping this up to see if anyone has any other suggestions. This thing is driving me crazy. I've tried it on both a HJ and PJ with the same result.

mtymyk · 02-08-2013, 07:06 PM

Have you tried using a different servo cable? If its not the cable I'd say the Program Card is defective.

Sent from my iPhone 4S using Tapatalk

Goldenhour · 02-11-2013, 01:29 PM

Isn't the two contact jumper supposed to be plugged in? Opposite side of esc master and slave jacks.

01-21-2013, 07:49 PM	#1 (permalink)
bmclaurin Registered Users Join Date: Jan 2011	Connecting Progcard II to HeliJive I've done this successfully a few times, but for whatever reason I can't get the connection to work now with my HJ. I'm using HJ120 (v11). I removed both the master and slave cables from the HJ and then connected the master port from the HJ to the 'ESC' port on the Progcard II. I then powered the HJ with my normal flight pack. When I do this, all the lights on the Progcard II momentarily light up for about 1 second and then turn off. What am I doing wrong? __________________ Nitro: Synergy N5c, Synergy N7 Electric: Synergy E7, Synergy E5, Logo 600SX, Henseleit TDR Last edited by bmclaurin; 01-21-2013 at 09:07 PM..

01-21-2013, 10:37 PM	#2 (permalink)
Vinger Registered Users My HF Map location Join Date: Sep 2007	Strange as that is the correct procedure, just make sure of the polarity of the cable at both ProgCard and HJ side. __________________ Henseleit TDR, TDR2, TDF, TDS, TDSF Kontronik, Scorpion ESC, iChargers, VBar, VControl Old hand at Planks Peter

02-08-2013, 06:08 PM	#3 (permalink)
bmclaurin Registered Users Thread Starter Join Date: Jan 2011	Bumping this up to see if anyone has any other suggestions. This thing is driving me crazy. I've tried it on both a HJ and PJ with the same result. __________________ Nitro: Synergy N5c, Synergy N7 Electric: Synergy E7, Synergy E5, Logo 600SX, Henseleit TDR

02-08-2013, 07:06 PM	#4 (permalink)
mtymyk Registered Users Join Date: Jun 2010	Connecting Progcard II to HeliJive Have you tried using a different servo cable? If its not the cable I'd say the Program Card is defective. Sent from my iPhone 4S using Tapatalk __________________ Team Rotorquest/ SAB Heli Canada

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-11-2013, 01:29 PM	#5 (permalink)
Goldenhour Registered Users Join Date: Jun 2009	Isn't the two contact jumper supposed to be plugged in? Opposite side of esc master and slave jacks.

Register Now

Log-in