Register Now

skurniaw · 09-05-2007, 06:19 PM

I would like to calibrate my 14MZ, but I can not find the calibration program in this thread. Can somebody show it to me where to get it ?

Thanks a lot

MZFAN · 09-06-2007, 09:26 AM

You can find the FX40 one on RCFAN page:
http://www.rcfan.com/radios.html
It will work on certain condition with the 14MZ.
I have just recalibrated my sticks with it because of neutral points that were off.

poerqwa · 09-10-2007, 11:11 AM

Just make sure that when you use this FX40 version you also need to go back to encoder version 1.31.

I learned this the hard way

Marcomm · 09-27-2007, 02:09 AM

Quote:

Originally Posted by poerqwa

Just make sure that when you use this FX40 version you also need to go back to encoder version 1.31.

I learned this the hard way

Also I must calibrate a T14Mz Tutaba but when the program immediately departs 14mzutil the radio turn-off .
does it depend on the installed firmware in the t14?

poerqwa · 09-27-2007, 04:08 PM

Yes.

I had to use the encoder 1.31 software in the 14mz to get the utility working.

Greetz,

Marc

Marcomm · 09-28-2007, 03:46 AM

Quote:

Originally Posted by poerqwa

Yes.

I had to use the encoder 1.31 software in the 14mz to get the utility working.

Greetz,

Marc

Thank's !
With 1.31 firmware, it perfectly works...

coldsteel · 10-30-2007, 10:28 PM

The LST,RST,LS,RS no in the Calibration Program ,it invalidation ?

oak · 01-06-2008, 05:20 AM

Anyone know what functionality the different buttons in the lower right corner with something that looks like japanese or chinese characters (or similar) is providing?

Would be nice if someone could "translate".

MZFAN · 01-10-2008, 07:51 AM

Hi oak,
I don't recall these, could you take a picture?

oak · 01-12-2008, 08:14 AM

When you go into "calibration", and the press "compensation" to start the calibration process, five buttons appear in the lower right corner of the screen. Let's name them button 1 to 5 counting from left to right. (see attachment 1).

- Pressing button 1 OR 2 toggles the appearance of button 2 (see picture 1 vs. 2).
- Pressing button 3 toggles the appearance of itself (see picture 2 vs.3).
- Pressing button 4 brings up a window with three tabs as shown in picture 4 through 6.
- Pressing button 5 brings up a window with two tabs as shown in picture 7 and 8.

MZFAN · 01-12-2008, 10:01 PM

This is the Input Method Editor (IME) from Microsoft to choose between the different writting style in Japanese (picture 1 to 3). Then you have the property screen where first tab is the imput system (picture 4), the second is the dictionnary used (picture 5) and the third is the version information (picture 6).
The last two picture are about customizing the dictionnary. The first tab (picture 7) allows you to add a new word and the second tab (picture 8) to remove some.

I don't know why it is there. This input editor function normaly appears when you have something to write in a form for example.

oak · 01-13-2008, 05:00 AM

Thanks, that clarified things a bit.

gurudutt · 07-07-2009, 10:38 AM

Can someone PLS mail me the 14Mz Clabration Software and the Utility
guruduttdhuri@yahoo.co.in
Regards,
Gurudutt.

xxcysxx · 07-25-2009, 10:38 AM

do a virus scan first before using. i will not be hield resposible if you brick your 14mz.
use at your own risk!!!

this is the version 1.31 encoder
http://mywebpages.comcast.net/tranth...4MZ_V1_3_1.zip

this is the t14mzutility software
http://mywebpages.comcast.net/tranth...st_program.zip

this is the pdf format instruction manual
http://mywebpages.comcast.net/tranth...1M23N14837.pdf

you must downgrade the encoder to 1.31 to run the utility. use the utility to calibrate the transmitter sticks only, dont calibrate the switches. this utility is for fx-40 and switch mapping is different from 14mz. after the sticks are calibrated, you can upgrade the encoder to the latest version again.

also make sure you back up all your models stored on your transmitter onto the memory card for safety.

reply back to this thread if you have sucessfully calibrated your transmitter with the above programs.

InColdBlood · 11-21-2009, 12:13 PM

Who can help me?i want only change mode from 2 to mode 1...but i have a problem...i use a memory card to downgrade at versione 1.3.1 and its ok

when i put the t14mz utility program, it start but when arrive at choose menù it stop and i read model save data and its shutoff.

in update mode its don't work...

who can help me please...where i wrong?

InColdBlood · 11-22-2009, 12:37 PM

who help me???
pleaseeeeee!!!

InColdBlood · 11-23-2009, 07:08 AM

Quote:

Originally Posted by xxcysxx

do a virus scan first before using. i will not be hield resposible if you brick your 14mz.
use at your own risk!!!

this is the version 1.31 encoder
http://mywebpages.comcast.net/tranth...4MZ_V1_3_1.zip

this is the t14mzutility software
http://mywebpages.comcast.net/tranth...st_program.zip

this is the pdf format instruction manual
http://mywebpages.comcast.net/tranth...1M23N14837.pdf

you must downgrade the encoder to 1.31 to run the utility. use the utility to calibrate the transmitter sticks only, dont calibrate the switches. this utility is for fx-40 and switch mapping is different from 14mz. after the sticks are calibrated, you can upgrade the encoder to the latest version again.

also make sure you back up all your models stored on your transmitter onto the memory card for safety.

reply back to this thread if you have sucessfully calibrated your transmitter with the above programs.

I try this procedure but it don't work on my radio...why?

InColdBlood · 11-23-2009, 12:26 PM

ok...i don't have any problem i use firmware 1.0.1 and it work very good...

now i have my t14 mode 1 and all stick recalibrated...^_^

Very very simple...

i don't spend money ^_^

helitoftere · 07-14-2010, 07:58 AM

Hello, I have the same problem with firmware 1.3.1
It turn off immediatly after turned on.

Where can I find the 1.0.1 firmware please ?

xxcysxx · 07-26-2010, 12:04 AM

this is the updated manual of the calibrated utility. the above link is now null.
http://home.comcast.net/~tranthienta...thout%20OS.pdf

09-05-2007, 06:19 PM	#1 (permalink)
skurniaw Join Date: Oct 2006	Calibration Program for 14MZ I would like to calibrate my 14MZ, but I can not find the calibration program in this thread. Can somebody show it to me where to get it ? Thanks a lot

09-10-2007, 11:11 AM	#3 (permalink)
poerqwa Registered Users My HF Map location Join Date: Oct 2004	Just make sure that when you use this FX40 version you also need to go back to encoder version 1.31. I learned this the hard way __________________ *** If it FLIES it WILL CRA$H *** T18MZ, JR Sylphide E12 & E11, JR Airskipper 50 FBL, Hirobo Sceadu EX 50, Hirobo Lepton EX

09-27-2007, 04:08 PM	#5 (permalink)
poerqwa Registered Users My HF Map location Join Date: Oct 2004	Yes. I had to use the encoder 1.31 software in the 14mz to get the utility working. Greetz, Marc __________________ *** If it FLIES it WILL CRA$H *** T18MZ, JR Sylphide E12 & E11, JR Airskipper 50 FBL, Hirobo Sceadu EX 50, Hirobo Lepton EX

01-12-2008, 08:14 AM	#10 (permalink)
oak Registered Users Join Date: Jun 2005	When you go into "calibration", and the press "compensation" to start the calibration process, five buttons appear in the lower right corner of the screen. Let's name them button 1 to 5 counting from left to right. (see attachment 1). - Pressing button 1 OR 2 toggles the appearance of button 2 (see picture 1 vs. 2). - Pressing button 3 toggles the appearance of itself (see picture 2 vs.3). - Pressing button 4 brings up a window with three tabs as shown in picture 4 through 6. - Pressing button 5 brings up a window with two tabs as shown in picture 7 and 8. Attached Thumbnails

07-25-2009, 10:38 AM	#14 (permalink)
xxcysxx Registered Users Join Date: Aug 2007	do a virus scan first before using. i will not be hield resposible if you brick your 14mz. use at your own risk!!! this is the version 1.31 encoder http://mywebpages.comcast.net/tranth...4MZ_V1_3_1.zip this is the t14mzutility software http://mywebpages.comcast.net/tranth...st_program.zip this is the pdf format instruction manual http://mywebpages.comcast.net/tranth...1M23N14837.pdf you must downgrade the encoder to 1.31 to run the utility. use the utility to calibrate the transmitter sticks only, dont calibrate the switches. this utility is for fx-40 and switch mapping is different from 14mz. after the sticks are calibrated, you can upgrade the encoder to the latest version again. also make sure you back up all your models stored on your transmitter onto the memory card for safety. reply back to this thread if you have sucessfully calibrated your transmitter with the above programs. __________________ Tam

09-06-2007, 09:26 AM	#2 (permalink)
MZFAN Join Date: Aug 2007	You can find the FX40 one on RCFAN page: http://www.rcfan.com/radios.html It will work on certain condition with the 14MZ. I have just recalibrated my sticks with it because of neutral points that were off.

10-30-2007, 10:28 PM	#7 (permalink)
coldsteel Join Date: Oct 2007	The LST,RST,LS,RS no in the Calibration Program ,it invalidation ?

01-06-2008, 05:20 AM	#8 (permalink)
oak Registered Users Join Date: Jun 2005	Anyone know what functionality the different buttons in the lower right corner with something that looks like japanese or chinese characters (or similar) is providing? Would be nice if someone could "translate".

01-10-2008, 07:51 AM	#9 (permalink)
MZFAN Join Date: Aug 2007	Hi oak, I don't recall these, could you take a picture?

01-12-2008, 10:01 PM	#11 (permalink)
MZFAN Join Date: Aug 2007	This is the Input Method Editor (IME) from Microsoft to choose between the different writting style in Japanese (picture 1 to 3). Then you have the property screen where first tab is the imput system (picture 4), the second is the dictionnary used (picture 5) and the third is the version information (picture 6). The last two picture are about customizing the dictionnary. The first tab (picture 7) allows you to add a new word and the second tab (picture 8) to remove some. I don't know why it is there. This input editor function normaly appears when you have something to write in a form for example.

01-13-2008, 05:00 AM	#12 (permalink)
oak Registered Users Join Date: Jun 2005	Thanks, that clarified things a bit.

07-07-2009, 10:38 AM	#13 (permalink)
gurudutt Registered Users Join Date: Nov 2007	Can someone PLS mail me the 14Mz Clabration Software and the Utility guruduttdhuri@yahoo.co.in Regards, Gurudutt.

11-21-2009, 12:13 PM	#15 (permalink)
InColdBlood Join Date: Nov 2009	Who can help me?i want only change mode from 2 to mode 1...but i have a problem...i use a memory card to downgrade at versione 1.3.1 and its ok when i put the t14mz utility program, it start but when arrive at choose menù it stop and i read model save data and its shutoff. in update mode its don't work... who can help me please...where i wrong?

11-22-2009, 12:37 PM	#16 (permalink)
InColdBlood Join Date: Nov 2009	who help me??? pleaseeeeee!!!

11-23-2009, 12:26 PM	#18 (permalink)
InColdBlood Join Date: Nov 2009	ok...i don't have any problem i use firmware 1.0.1 and it work very good... now i have my t14 mode 1 and all stick recalibrated...^_^ Very very simple... i don't spend money ^_^

07-14-2010, 07:58 AM	#19 (permalink)
helitoftere Registered Users Join Date: Jun 2006	Hello, I have the same problem with firmware 1.3.1 It turn off immediatly after turned on. Where can I find the 1.0.1 firmware please ?

07-26-2010, 12:04 AM	#20 (permalink)
xxcysxx Registered Users Join Date: Aug 2007	this is the updated manual of the calibrated utility. the above link is now null. http://home.comcast.net/~tranthienta...thout%20OS.pdf __________________ Tam

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in